Pics Of 2nd Gen Sedans With Aftermarket Rims!
#1113
#1114
I bought 245/40s to go on my 19x9.5 squared set up. My 08x is dropped slightly, your sidewall may need to be bigger/smaller depending on your ride height. You could also go 255/40 which is what I almost went with.
#1117
#1119
Work in progress (isn't it always?) as I am deciding on getting the lip PC'd gloss black vs getting the face Gunmetal and leaving the lip polished.... but for now:
Vossen VVS-082
Eibach Pro Kit
IMAG0418.jpg?t=1339864320
IMAG0411.jpg?t=1339864090
IMAG0410.jpg?t=1339863903
btw for the -150 fans of my old setup, this was last year about now
Vossen VVS-082
Eibach Pro Kit
IMAG0418.jpg?t=1339864320
IMAG0411.jpg?t=1339864090
IMAG0410.jpg?t=1339863903
btw for the -150 fans of my old setup, this was last year about now
Last edited by Solo G; 06-16-2012 at 01:13 PM.
#1120
When I was picking rims I knew I had to have the wheel gap filled but couldn't justify shelling out for wheels AND a lowering kit on my not-so-deep pockets so I went with 22s.
thats water on the trunk btw... it decided to sprinkle a little bit on my drive before I took the pics
thats water on the trunk btw... it decided to sprinkle a little bit on my drive before I took the pics
#1121
I masked off the edges and used VHT with clear coat. I didnt do a write up but it wasnt hard other than the insanity of trying to make sure the width was even across the whole thing. I tried to get the tint as close as possible to black without blocking the light completely. The pics show it passes with no problem. No tix for that... but one for my windows.
#1122
I masked off the edges and used VHT with clear coat. I didnt do a write up but it wasnt hard other than the insanity of trying to make sure the width was even across the whole thing. I tried to get the tint as close as possible to black without blocking the light completely. The pics show it passes with no problem. No tix for that... but one for my windows.
#1123
Nope, I have never opened up my taillights but I am thinking about it. I want to add a thin LED tube to the outline of the tails in some way, either integrated with the turn signals, brake lights, or just driving lights. If only I had confidence in my skills in electrical work, I would be tackling it already.
The transition between the tint and the non was only handled with the clear coat. Being careful with the painters tape is realy the only way to manage the crispness of the transition. It took alot of using my thumbnail and a few other objects to work the tape into the curve as I wanted. I'll take some pics of the taillights when I get back to the car and post em.
EDIT
Pics
IMAG0439.jpg?t=1340156427
IMAG0438.jpg?t=1340156614
IMAG0437.jpg?t=1340157950
The transition between the tint and the non was only handled with the clear coat. Being careful with the painters tape is realy the only way to manage the crispness of the transition. It took alot of using my thumbnail and a few other objects to work the tape into the curve as I wanted. I'll take some pics of the taillights when I get back to the car and post em.
EDIT
Pics
IMAG0439.jpg?t=1340156427
IMAG0438.jpg?t=1340156614
IMAG0437.jpg?t=1340157950
Last edited by Solo G; 06-19-2012 at 10:10 PM.
#1124
Just installed the new wheels and thought I'd share. Sorry for crappy cell phone pics, and the sun wouldn't come out. No drop yet, it's in the future plans. No rubbing or issues as of yet.
Stance SC-5ive, flat black spokes with polished black lip.
f20x8.5 +35 245/35/20
r20x10 +35 275/30/20
Stance SC-5ive, flat black spokes with polished black lip.
f20x8.5 +35 245/35/20
r20x10 +35 275/30/20
Last edited by sev7ntang0; 07-16-2012 at 09:22 AM.