07 g35 sedan Strut Bar from GT SPEC and my new lugs
#35
Originally Posted by paulg35s
And you're right about the other side being a bit higher. I was in a rush and I wasn't paying attention when I was putting it on. I have the left side raised now to match it
#36
Originally Posted by chiem
Do you have a new pic to show the fitment over the engine cover ? The original pic you posted looked awfully close. Are you sure there's no rubbing/rattling issues, especially during acceleration around a turn ?
The height is adjustable. In the pics its down, but can be raised up for more clearance.
#43
#44
Front struts (upper) specifications 2007 G35x sedan
Hope this helps.
The following users liked this post:
kool_yaar (01-14-2013)
#45
I have the GTSpec strut tower bar as well and, as many have stated, couldn't find the torque specification so I called my local dealer (Atlantic Infiniti). According to the guy I spoke with, the factory torque specifications are 34.(something) So I've torqued mine @ 35 ft lbs.
Hope this helps.
Hope this helps.
I can only imagine how relieved kool will be to finally get his answer on that torque spec.
Universally, any STB that attaches to the bolts of the actual strut mount will simply be torqued to the same spec as the struts.
(While your intent was good, it's always helps to look at the dates to see if it is still relevant)
The following users liked this post:
kool_yaar (01-14-2013)