Black Grille/Black Rims
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 67
Likes: 0
From: Houston, Texas
Thanks broooo.
Can someone point me in the right direction of a guide on how to get inside my headlights?
I'll do that and stick some leds in there while I'm at it.. Everyone tells me I need to paint them
Can someone point me in the right direction of a guide on how to get inside my headlights?
I'll do that and stick some leds in there while I'm at it.. Everyone tells me I need to paint them
You're Despicable
Joined: May 2008
Posts: 6,167
Likes: 33
From: on a sand dune
damn right man, c'mon dude that's despicable 
Search for the details. But its something like heat up an oven to 200 Deg. F. shut it off. throw the lights in, wait 10 minutes, take them out and the crack the two halves open. If the glue is not soft enough maybe bump up the temp. and repeat the process. I'd take your time as doing it wrong will yellow up your lenses, and dont put them in the oven while on as the direct heat will eff them up too. But again search and find some better instructions. I'd bet its in our DIY or Driver's DIY section shouldnt be hard to find.
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 67
Likes: 0
From: Houston, Texas
Haha
Registered User
Joined: Dec 2005
Posts: 327
Likes: 3
From: Wellington, FL
1. Painted stock rims look hannis as ****
2. Why ruin your paint by bringing your paint by bringing your car to a car wash. (your 16, what other **** do you haveyo do? Wash your car yourself)
3. Last time I check G35's were made by Infiniti not Audi those LED's should go.
4. If you are gonna **** **** up, do it properly. Wedging your led strip between the headlight and bumper is doing **** half assed....Also wiring it to the parking light should have been a must and probably would have required less work them making a "blue" toggle switch inside of the car.
The grill came out nice though
Cheers
Josh
2. Why ruin your paint by bringing your paint by bringing your car to a car wash. (your 16, what other **** do you haveyo do? Wash your car yourself)
3. Last time I check G35's were made by Infiniti not Audi those LED's should go.
4. If you are gonna **** **** up, do it properly. Wedging your led strip between the headlight and bumper is doing **** half assed....Also wiring it to the parking light should have been a must and probably would have required less work them making a "blue" toggle switch inside of the car.
The grill came out nice though
Cheers
Josh
Thread Starter
|
Registered User
Joined: Oct 2008
Posts: 67
Likes: 0
From: Houston, Texas
1. Painted stock rims look hannis as ****
2. Why ruin your paint by bringing your paint by bringing your car to a car wash. (your 16, what other **** do you haveyo do? Wash your car yourself)
3. Last time I check G35's were made by Infiniti not Audi those LED's should go.
4. If you are gonna **** **** up, do it properly. Wedging your led strip between the headlight and bumper is doing **** half assed....Also wiring it to the parking light should have been a must and probably would have required less work them making a "blue" toggle switch inside of the car.
The grill came out nice though
Cheers
Josh
2. Why ruin your paint by bringing your paint by bringing your car to a car wash. (your 16, what other **** do you haveyo do? Wash your car yourself)
3. Last time I check G35's were made by Infiniti not Audi those LED's should go.
4. If you are gonna **** **** up, do it properly. Wedging your led strip between the headlight and bumper is doing **** half assed....Also wiring it to the parking light should have been a must and probably would have required less work them making a "blue" toggle switch inside of the car.
The grill came out nice though
Cheers
Josh
