Va Beach / Hampton Roads G owners?
#367
#368
#370
I try to get pic's, but it's not working.
Front's
-The top 3 nuts (28 FT Lbs pre-tq on all nuts, then 44 FT Lbs final tq)
-The bottom bolts (57 Ft Lbs)
Rear's
-The top 2 nuts (21 Ft Lbs)
-The bottom bolt and nut (81 Ft Lbs)
-The spring mount (53 Ft Lbs)
Rear Camber Arms
-The inboard bolt (53 Ft Lbs)
-The outboard bolt (65 Ft Lbs)
Front's
-The top 3 nuts (28 FT Lbs pre-tq on all nuts, then 44 FT Lbs final tq)
-The bottom bolts (57 Ft Lbs)
Rear's
-The top 2 nuts (21 Ft Lbs)
-The bottom bolt and nut (81 Ft Lbs)
-The spring mount (53 Ft Lbs)
Rear Camber Arms
-The inboard bolt (53 Ft Lbs)
-The outboard bolt (65 Ft Lbs)
Last edited by citymunky; 06-20-2008 at 07:57 PM.
#371
![Unhappy](https://g35driver.com/forums/images/icons/icon9.gif)
So this weekend I planned to remove my MREV2, 5/16 Spacer, and Upper Plenum to get them powercoated. Then re-install my OEM Lower Plenum and a borrowed Upper Plenum. Then I got this crazy idea
. Since I'm removing the whole intake system, I really don't have anything in the way to do something I wanted to do for a while. Paint my Valve Covers.
Which leads me to my problem. I don't have a place to do the work. I would go to the Auto Hobby shop on base, but I can't paint there, or anywhere else on the base. I asked a few co-workers, and friends but they all have plans for the weekend. (Fishing, Visit the Mistress, 2nd Job, Out of Town). If anybody could help, I would appreciate it very much
, if not I guess I'm sucking.
![IDEA](https://g35driver.com/forums/images/smilies/idea.gif)
![Biggthumpup](https://g35driver.com/forums/images/smilies/biggthumpup.gif)
![Fingersx](https://g35driver.com/forums/images/smilies/fingersx.gif)
![36](https://g35driver.com/forums/images/smilies/36.gif)
#372
#373
#374