Northern California San Francisco, Oakland, Sacramento, San Jose, Pleasanton, etc.

Adding some new stuff to the car.

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old May 2, 2009 | 11:05 PM
  #1  
urban's Avatar
Thread Starter
|
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Adding some new stuff to the car.

Well as I am bored and have nothing better to do with my money I decided to upgrade a few things on the car.

Probably some time in June I will be adding the following items;

GTM stage 2 cams
11.00 mm Peak Lift
232 deg. Dur. at 0.050" lift
272 deg. Adv. Dur.

New 06 lower plenum from Nissan with the shorter runners.

Also contemplating going to external wastegates but need to think about that a little more.

Having the rims powder coated black like this;


I also have the Greddy sideskirts sitting here in the garage and waiting on my CS bumper from Eric to arrive so I can get them all on at the same time.

I have 10mm spacers to install but need my fenders rolled.

Lastly I will install my Works Bell paddle shifter which I have had for months.

After that I think I am done with this car, spent enough on it already;

Engine

Resurfaced cylinder head with an RA finish
New viton valve stem seals
HKS head gasket
Wiseco® Extreme Duty pistons 8.5 compression
Carillo Forged Rods
Mag and micro polishing of the crankshaft
Balancing of the rotating assembly
Rear main seal assembly
GTM® Race bearings (standard bearings)
ARP® 2000 11mm head studs
Crawford Plenum 5/16" Spacer
Deathwerks 660cc Injectors
Walboro 255lb Fuel Pump
APS Twin Turbo System
GTM ECU Reflash
Blitz SBC Boost Controller
Upgraded actuator springs (red)
HKS FCON V Pro
HKS F CON Navigator
Fast Intentions Intimidator exhaust and test pipes
Greddy Catch Can
Stillen Upgraded oil cooler
JDM Right Hand Battery Cover
NRG Hood Shocks

Suspension

GT Spec Rear Lateral Brace bar
Front and Rear Stillen Sway Bars
SPC Front Camber kit
SPC Rear Camber Arms and Toe
Tein CS Coilovers
Tein EDFC

Transmission

GTM Upgraded Tranny Internals
GTM Upgraded valve body
Edge Racing Upgraded Torque convertor
B&M Upgraded Tranny cooler

Brakes

Wilwood SS brakelines
Wilwood 6 Piston 14" Rotor Front Brake kit
Wilwood 4 Piston 13" Rotor Rear Brake Kit

Wheels/Tires

Project Kic R40 Neochrome lugs
Volk SF Challenge 19x9.5 & 19x10.5
Khumo SPT 245/275

Exterior

Klumzyee Greddy Sideskirts
06 Projector Headlights
Philips Xenon 6000k Ultinon Bulbs
Sony Reverse Camera
KP Technologies Tilt Down Mirror Module
KP Technologies Roll Up Window Module
Kuruma Z Front Bumper
Klumzyee Roof Spoiler


Just going to make sure I can add another 100,000 miles on the car and get my moneys worth See you guys at some future meets.

 
Reply
Old May 3, 2009 | 12:15 AM
  #2  
tbg35c's Avatar
Registered User
iTrader: (3)
Joined: Oct 2003
Posts: 1,999
Likes: 174
From: San Jose, CA
its gonna be the sickest TB around. Pls post the updates ASAP
 
Reply
Old May 3, 2009 | 04:41 PM
  #3  
urban's Avatar
Thread Starter
|
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Will do, also trying to get a grounding kit from SxExCx
 
Reply
Old May 3, 2009 | 05:04 PM
  #4  
sage3's Avatar
Registered User
iTrader: (8)
Joined: Aug 2007
Posts: 205
Likes: 0
From: East & South Bay
Sick man, def want to see some updated pix
 
Reply
Old May 3, 2009 | 05:24 PM
  #5  
KungFuPanda's Avatar
Registered User
iTrader: (4)
Joined: Oct 2008
Posts: 613
Likes: 0
From: SF BAY
that's SICK!
 
Reply
Old May 3, 2009 | 05:25 PM
  #6  
French87's Avatar
Registered User
iTrader: (17)
Joined: Dec 2006
Posts: 2,007
Likes: 7
From: San Jose
damn, impressive list you got there!

mind if I ask how much you think youve spent on the G so far? in just mods, excluding the cost of the car itself..
 
Reply
Old May 3, 2009 | 05:26 PM
  #7  
urban's Avatar
Thread Starter
|
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Originally Posted by French87
damn, impressive list you got there!

mind if I ask how much you think youve spent on the G so far? in just mods, excluding the cost of the car itself..
To date probably 35k
 
Reply

Trending Topics

Old May 4, 2009 | 02:54 AM
  #8  
limeg35's Avatar
Registered User
Joined: Jun 2003
Posts: 5,197
Likes: 1
From: Modesto, CA
I didnt see the paddle shifter on the list.


NVM, I see it...hurry up and install that sucker ready already.
 
Reply
Old May 4, 2009 | 10:01 AM
  #9  
V35 Skyline GT's Avatar
Registered User
iTrader: (10)
Joined: Jul 2006
Posts: 3,942
Likes: 7
From: PNW in Washington
6MT Coupe
Ah yes, finally going for those stage 2 heads

"New 06 lower plenum from Nissan with the shorter runners"
Is that like the 'rev-up' lower collector or something different.
 
Reply
Old May 4, 2009 | 01:10 PM
  #10  
urban's Avatar
Thread Starter
|
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Originally Posted by V35 Skyline GT
Ah yes, finally going for those stage 2 heads

"New 06 lower plenum from Nissan with the shorter runners"
Is that like the 'rev-up' lower collector or something different.
Yes that is what it is, the rev-up lower collector, should pick up some nice HP numbers with this and the cams. Instead of power dropping off at 6000rpm it should be good all the way up to 7000rpm now.

Not looking to break any records but anywhere in the 500's on pump gas would be great
 
Reply
Old May 4, 2009 | 01:44 PM
  #11  
Grace's Avatar
Avoiding potholes
Joined: Apr 2006
Posts: 11,682
Likes: 150
From: SF Bay Area
Originally Posted by urban
Yes that is what it is, the rev-up lower collector, should pick up some nice HP numbers with this and the cams. Instead of power dropping off at 6000rpm it should be good all the way up to 7000rpm now.

Not looking to break any records but anywhere in the 500's on pump gas would be great
Talk about a sleeper!
I love it.
 
Reply
Old May 4, 2009 | 01:47 PM
  #12  
urban's Avatar
Thread Starter
|
Registered User
iTrader: (29)
Joined: Jan 2004
Posts: 3,744
Likes: 72
From: California
Originally Posted by Grace
Talk about a sleeper!
I love it.
Need to take you for a spin one of these days
 
Reply
Old May 4, 2009 | 02:07 PM
  #13  
Grace's Avatar
Avoiding potholes
Joined: Apr 2006
Posts: 11,682
Likes: 150
From: SF Bay Area
Originally Posted by urban
Need to take you for a spin one of these days
As long as we can find an old lady to shock when you rev it.
 
Reply
Old May 4, 2009 | 03:10 PM
  #14  
DEMoLITIoN's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 1,469
Likes: 46
From: North Bay 707
photoshoot?
 
Reply
Old May 4, 2009 | 03:39 PM
  #15  
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member



That's going to be fun!!!
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 12:08 AM.