NorthWest Serving AK, ID, OR, WA

Tint shop that will do 'custom' work (South of Seattle)

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 02-17-2008 | 09:10 PM
iansw's Avatar
Thread Starter
|
Registered User
Joined: Jun 2007
Posts: 31
Likes: 0
Tint shop that will do 'custom' work (South of Seattle)

Posted this on MyG37.com regional - but figured I'd try here also...


I have Bat's G37 GT-R headlight and taillight overlays in my house - ready to go on the car.

Realizing that while I can replace a Maxima transmission in under 1.5 hours - I cannot do the "artsy" stuff like tint, etc. I need someone to do it for me.

So I went to 4 shops around the Puyallup area today and not one of them was even willing to try putting these things on. 3 of them said especially with the headlights having 3M guard they wouldn't do those. They say it seperates after a few months. BlueBatmobile tells me he's never heard of anyone saying they wouldn't put his overlays on over the 3M.

With the taillights, they say the curve of the taillight is just too odd an angle and you can't lay tint on it. I even tried showing them pics of others on the board who HAVE done it - but they were all unwilling.

So - anyone know of a good tint shop on the south-end of Seattle that would be willing to do something like this?
 
  #2  
Old 02-17-2008 | 09:33 PM
djdannyj45's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 289
Likes: 0
From: OLYMPIA,WA
My friend that owns a shop in Olympia will put them on for sure. I already asked if i got some if he would do them and he said yep.

Auto Trim and Design in Olympia Casey is the owner...
 
  #3  
Old 02-17-2008 | 11:51 PM
iansw's Avatar
Thread Starter
|
Registered User
Joined: Jun 2007
Posts: 31
Likes: 0
This one?

Auto Trim Design
2643 Martin Way E, Lacey, WA1.40mi
(360) 236-8852

Map

Sounds like it may be worth the drive.
 
  #4  
Old 02-18-2008 | 02:40 PM
MixturePinoy's Avatar
Banned
iTrader: (9)
Joined: Feb 2006
Posts: 11,076
Likes: 6
From: Washington State
I did my own on my G. I'd do these for you but i can't warrenty any of my work
 
  #5  
Old 02-18-2008 | 03:29 PM
JOKER's Avatar
CLUB MODERATOR
iTrader: (24)
Joined: Oct 2005
Posts: 9,084
Likes: 347
From: earth
Originally Posted by mixturepinoy
I did my own on my G. I'd do these for you but i can't warrenty any of my work

Don't let Tito touch your car.
 
  #6  
Old 02-18-2008 | 03:46 PM
redlude97's Avatar
Registered User
iTrader: (25)
Joined: Feb 2006
Posts: 1,911
Likes: 8
From: Seattle, WA
Originally Posted by JOKER
Don't let Tito touch your car.
+1, it loses 1hp per minute he touches it, just ask him for a dyno plot
 
  #7  
Old 02-18-2008 | 03:52 PM
MixturePinoy's Avatar
Banned
iTrader: (9)
Joined: Feb 2006
Posts: 11,076
Likes: 6
From: Washington State
Hai was scared to dyno

BTW, it's not that hard to put on, you just gotta take your time
 

Trending Topics

  #8  
Old 02-18-2008 | 05:58 PM
iansw's Avatar
Thread Starter
|
Registered User
Joined: Jun 2007
Posts: 31
Likes: 0
I think the G35 tails are quite a bit different than the G37 - the G37 has way more curve to it. Goes 45 degrees out for about 1/4 inch, then turns to an almost a 90 degree angle the other direction (toward the front of the car) actually at the edge. Kind of like a little lip.....

That's why I'm so hesitant to do it myself.
 
  #9  
Old 02-18-2008 | 06:55 PM
redlude97's Avatar
Registered User
iTrader: (25)
Joined: Feb 2006
Posts: 1,911
Likes: 8
From: Seattle, WA
Originally Posted by Mixturepinoy
Hai was scared to dyno

BTW, it's not that hard to put on, you just gotta take your time
What would the point of dynoing a car thats is and will remain stock engine wise?
 
  #10  
Old 02-18-2008 | 11:50 PM
djdannyj45's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 289
Likes: 0
From: OLYMPIA,WA
Originally Posted by iansw
This one?

Auto Trim Design
2643 Martin Way E, Lacey, WA1.40mi
(360) 236-8852

Map

Sounds like it may be worth the drive.
yes sir!
 
  #11  
Old 02-18-2008 | 11:52 PM
djdannyj45's Avatar
Registered User
iTrader: (1)
Joined: Jun 2006
Posts: 289
Likes: 0
From: OLYMPIA,WA
Originally Posted by Mixturepinoy
I did my own on my G. I'd do these for you but i can't warrenty any of my work
LOL i am going to get "I LOVE TITO" stickers made.
 
  #12  
Old 02-19-2008 | 01:40 AM
Triple8Sol's Avatar
Registered User
iTrader: (151)
Joined: Aug 2003
Posts: 7,288
Likes: 0
From: Seattle, WA
Originally Posted by redlude97
What would the point of dynoing a car thats is and will remain stock engine wise?
To know if your car is a factory freak, a lemon, or something in between?
 
  #13  
Old 02-19-2008 | 02:46 AM
redlude97's Avatar
Registered User
iTrader: (25)
Joined: Feb 2006
Posts: 1,911
Likes: 8
From: Seattle, WA
Originally Posted by Triple8Sol
To know if your car is a factory freak, a lemon, or something in between?
So I can pick up groceries quicker?
 
  #14  
Old 02-19-2008 | 10:24 AM
MixturePinoy's Avatar
Banned
iTrader: (9)
Joined: Feb 2006
Posts: 11,076
Likes: 6
From: Washington State
Originally Posted by redlude97
So I can pick up groceries quicker?
no, so you can go to baby gap and buy more shirts
 
  #15  
Old 02-19-2008 | 09:03 PM
icedoutis's Avatar
Registered User
Joined: Jun 2007
Posts: 58
Likes: 0
From: seattle
Originally Posted by Mixturepinoy
no, so you can go to baby gap and buy more shirts
lol
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Tint shop that will do 'custom' work (South of Seattle)



All times are GMT -4. The time now is 09:14 AM.