Engine Bay Pics*Post here*
#362
yeah I had problems with the GTSpec bar install as well...you get one side in then tried putting the bolt on the other side and it just wouldnt work...I had to use a screwdriver to bend it enough to actually allow some movement/wiggle room to put the bolt through. ohhwell...Anyways does anyone recommend anything in my engine bay besides what I posted?
#363
Originally Posted by k67p67
The NRG STB is a tight fit in the brackets. The added thickness of the powdercoat would likely pose a problem when installing/removing the bar. You'd probably end up chipping the powder. I had to touch-up my brackets many times when I scraped off some paint during installation/removal of the bar and the paint isn't as thick as powdercoat.
#364
Former G35driver Vendor
iTrader: (84)
New pic, sorry for the dirty bay gotta clean it + iphone pic
![](http://i241.photobucket.com/albums/ff186/ShanesG/bay.jpg)
comming soon:
Longer bolts so i can put the red washers in the center of plenum
A top secret project for my stillen intake, never been done before![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
New radiator hoses and possibly front hose delete
CF battery covers(just the detachable pieces)
Polished TB from sean
![](http://i241.photobucket.com/albums/ff186/ShanesG/bay.jpg)
comming soon:
Longer bolts so i can put the red washers in the center of plenum
A top secret project for my stillen intake, never been done before
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
New radiator hoses and possibly front hose delete
CF battery covers(just the detachable pieces)
Polished TB from sean
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
#372