Engine Bay Pics*Post here*
#979
#980
On a side note, does anybody know what size hoses are used for the catch cans? I want to go with steel braded lines for my greddy one.
#983
1 -The small hose off the catch can, on the passenger side, goes to the passenger side valve cover.
2 -The large hose off the catch can, on the passenger side, goes around the back of the engine, and to the rear of the drivers side valve cover.
3 -The large hose off the catch can, on the drivers side, goes to the intake pipe.
-Hose 2 and 3 basically replace the hose that normally goes between the intake pipe and the drivers side valve cover.
-You have to plug the vacuum line on the plenum that the small hose off the passenger side valve cover originally went to, since it's no longer used.
Confusing without pics, sorry. If you look at the pic Marcus posted, hopefully it make a little more sense. Also, keep in mind that with braided line you will have an issue getting the line to go exactly where you want it to. It's real stiff and doesn't bend as easily as rubber, so buy a little more than you think you'll need.
Now... more engine pics please
2 -The large hose off the catch can, on the passenger side, goes around the back of the engine, and to the rear of the drivers side valve cover.
3 -The large hose off the catch can, on the drivers side, goes to the intake pipe.
-Hose 2 and 3 basically replace the hose that normally goes between the intake pipe and the drivers side valve cover.
-You have to plug the vacuum line on the plenum that the small hose off the passenger side valve cover originally went to, since it's no longer used.
Confusing without pics, sorry. If you look at the pic Marcus posted, hopefully it make a little more sense. Also, keep in mind that with braided line you will have an issue getting the line to go exactly where you want it to. It's real stiff and doesn't bend as easily as rubber, so buy a little more than you think you'll need.
Now... more engine pics please
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
Last edited by zackt69; 03-04-2009 at 02:48 AM.
#984
1 -The small hose off the catch can, on the passenger side, goes to the passenger side valve cover.
2 -The large hose off the catch can, on the passenger side, goes around the back of the engine, and to the rear of the drivers side valve cover.
3 -The large hose off the catch can, on the drivers side, goes to the intake pipe.
-Hose 2 and 3 basically replace the hose that normally goes between the intake pipe and the drivers side valve cover.
-You have to plug the vacuum line on the plenum that the small hose off the passenger side valve cover originally went to, since it's no longer used.
Confusing without pics, sorry. If you look at the pic Marcus posted, hopefully it make a little more sense. Also, keep in mind that with braided line you will have an issue getting the line to go exactly where you want it to. It's real stiff and doesn't bend as easily as rubber, so buy a little more than you think you'll need.
Now... more engine pics please![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
2 -The large hose off the catch can, on the passenger side, goes around the back of the engine, and to the rear of the drivers side valve cover.
3 -The large hose off the catch can, on the drivers side, goes to the intake pipe.
-Hose 2 and 3 basically replace the hose that normally goes between the intake pipe and the drivers side valve cover.
-You have to plug the vacuum line on the plenum that the small hose off the passenger side valve cover originally went to, since it's no longer used.
Confusing without pics, sorry. If you look at the pic Marcus posted, hopefully it make a little more sense. Also, keep in mind that with braided line you will have an issue getting the line to go exactly where you want it to. It's real stiff and doesn't bend as easily as rubber, so buy a little more than you think you'll need.
Now... more engine pics please
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
do you have the catch can in stock?
#985
http://www.anplumbing.com/
#986
#987
#989
#990
Yes that is correct. Its on the bottom of my intake pipe (UTR), but its at the top right of the ARC intake pipe.