DPE has a face that looks like T1S.... I'm sure they'd sell you just the face. It's the Sp8 iirc

 

Lunek..basically the face is all you needed right? The inner barrel and the lips were made to the size you needed, correct?

 

OMG. That vid is so sick it made a stance hater like stance. he posted it on my facebook. I think mountains have moved. lol

 

and some Meisters w/ lip service

 

good stuff can't wait to see them

 

Anybody here ever cut their own inner fender well?

 

I know a guy that stays in orange county that can get barrels for u and widen your wheels and he can do a 20 inch up to 7 or 8 inch lips he do a lot of sizes he just did my work vsxx wheels his name is Ralph and u can text him to get more info at 949-478-2174

 

more specific? front or rear? you looking to cut out a section to fit something widers? ive hacked my fronts up to hell untill i finally just removed them. rears, i havent cut the fender well only the fender lips

 

so he would widen my t1s from 9.5 to lets say 10 and 10.5 to 12?

 

Is that wheel a 2 or 3pc wheel he can only do multipiece wheels he made my work vsxx from 19x9.5 +38 to 19x13 -5

 

Wheels both eurodre and i have are 2 piece welded. Only way to do it is to cut the wheels and re-weld. He does that?

 

Rears. Basically I've pulled and hammered out my fenders as much as I can. What's holding me back from pulling the fenders more is the double walled fender and I can't clear my wheels because of it. I'd at least like to reduce the upward flare I have and pull the fender out some more.

 

Yes he can cut and reweld he does a great job I will be posting up my wheels soon he also did a couple guys wheels that are on this thread and the 350z thread

 

2pc wheels ya should try weldcraft. Send them a email with pic of your wheel and what you want done. I was researching them when i was going to widen my T1S.

 

Oh ok...will have to look into it. Really would wanna get some wheels for cheap and just use the face for something like this.

Thanks for the additional info