Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]
Just buy cheap 3pc wheels a rebuild it like i did.
i dont know about 20s but i recently ordered a set of 7inch and 5inch lip for my19s from a wheel repair shop in dallas. Turn around time was what i expect due to the sizes i asked and it having to be machined then chromed.
i dont know about 20s but i recently ordered a set of 7inch and 5inch lip for my19s from a wheel repair shop in dallas. Turn around time was what i expect due to the sizes i asked and it having to be machined then chromed.
good stuff can't wait to see them
I know a guy that stays in orange county that can get barrels for u and widen your wheels and he can do a 20 inch up to 7 or 8 inch lips he do a lot of sizes he just did my work vsxx wheels his name is Ralph and u can text him to get more info at 949-478-2174
more specific? front or rear? you looking to cut out a section to fit something widers? ive hacked my fronts up to hell untill i finally just removed them. rears, i havent cut the fender well only the fender lips
so he would widen my t1s from 9.5 to lets say 10 and 10.5 to 12?
Wheels both eurodre and i have are 2 piece welded. Only way to do it is to cut the wheels and re-weld. He does that?
Rears. Basically I've pulled and hammered out my fenders as much as I can. What's holding me back from pulling the fenders more is the double walled fender and I can't clear my wheels because of it. I'd at least like to reduce the upward flare I have and pull the fender out some more.
Yes he can cut and reweld he does a great job I will be posting up my wheels soon he also did a couple guys wheels that are on this thread and the 350z thread
Thanks for the additional info