Agreed!!

finally stretched.
215/35/19 on 9" wide. +1 offset w/ 25mm spacer.
Now the problem is...that the car is too low but the sidewall won't touch the fender!
AND i need to stack up like 20mm spacers.. -19mm offset

the car is on the jack in the pic

^Why the stretch if you didn't need it to clear the fenders. You don't want to stack a 20mm on top of a 25mm spacer.

i like the stretched look, and sticking out of the fender. i expected the sidewall to touch the fender ha..ha... however, the very top of the tire can touch the fender if i get another 20mm spacer lol
h&r sells 45mm spacers..for $200

Honestly sounds like you need more aggressive wheels to do what you want to do. What wheels do you have now? Specs?

racing hart J5
9 fr and 10.5 rear. 19" 26 offset.
i honestly thought that 26+ is pretty good

offsets?

Wait a sec, didn't you say you put a 215 on a 9? But you have a 9.5/10.5 setup?

oh right. 9" front.
26 offset

get a 38mm spacer! PM henry@statik

i don't exactly know what size i need. so i'm looking for someone who can borrow me 20 or 25mm spacers that i can stack up to see the clearance

You deserve one of these for posting that in this thread

ROFL.
i meant like +26 original offset. Added 25mm now so it's at +1 now.
If i go 38mm, it'll bbe at -12 mm.

Well you could put on a 30mm spacer to be at -4 or do a 35mm= -9 that will look a lot better than the +1 fersure

Audi > Lexus

i actually have 25mm on now.
i need like 45mm spacers by eye measuring.
Do you know anyone who has 38mm or 15mm spacers that i can borrow for couple hours?