Aggressive Wheels & Stretched Tires: Post 'Em Up! [[Some NSFW]]
#4292
09-13-2009, 11:09 AM
#4294
09-13-2009, 02:04 PM
Registered User
#4295
09-13-2009, 02:20 PM
O disk and bbk will not work. I had to use 25mm spacers when I had the VSXX O disk.....that just barely cleared the front brakes by 3mm
#4296
09-13-2009, 03:29 PM
Registered User
#4297
09-13-2009, 03:41 PM
#4299
09-14-2009, 02:42 PM
quick question for you gurus
if i get work t1s in
9.5+5 O disk
10.5+3 O disk
(step lip alll daaay!)
would i still be able to fit a bbk in the front/rear with or without spacers?, my goal is to get as much lip as possible out of my wheels and fit the akebono bbk behind them.
basically whats the offset i should get for the maximum sized lip on my wheels without going into the negatives and still being able to fit a bbk with or without spacers.
if i get work t1s in
9.5+5 O disk
10.5+3 O disk
(step lip alll daaay!)
would i still be able to fit a bbk in the front/rear with or without spacers?, my goal is to get as much lip as possible out of my wheels and fit the akebono bbk behind them.
basically whats the offset i should get for the maximum sized lip on my wheels without going into the negatives and still being able to fit a bbk with or without spacers.
you will need an R-disk to clear the akebonos int he front. The only reason sin was able to clear his bbk with his low disk was because of spacers. Rear bbks tend to run less thick than the fronts so some you dont need to have a super high disk for clearance.
The face is a Matte anthracite mini textured finish, came out a lil lighter than i expected but i like it, lips are a custom tint paint almost looks exactly like burning black...
#4300
09-14-2009, 02:46 PM
