SxExCx's Polished Plenum Installed
#34
I've gotten quite a few questions about the plenum bolts I used. I got them from a local hardware store and they are called "M6 socket cap bolts". I used the same length bolts as listed in the Motordyne install guide which for me was (11) 35MM, (3) 55MM and (4) 70MM. I have a 5/16 plenum spacer so the bolt lengths will vary depending on the size of spacer. If you're completely OEM, the bolt lengths should be listed in the service manual.
The JDM fender washers that I used are compatible with the M6 socket cap bolts. Hope this helps.
The JDM fender washers that I used are compatible with the M6 socket cap bolts. Hope this helps.
#40
#44