San Diego G35 Club GTG

Subscribe
Jan 10, 2010 | 04:36 AM
  #5581  
what happend to ur cracked up Nismo front diffuser??? i wanna test fit and Ionic is laggin
Reply 0
Jan 10, 2010 | 11:27 AM
  #5582  
Quote: I disagree. You would have to add extra camber or get narrower tires to stretch them. You are the wheel/tire expert around here, but I still disagree. I'm running 10.5" 20's with a +45 offset and mine are pretty flush (rolled fenders of course) with a 275 tire. His are 10" with a +15 offset. (1/2" =12.7mm / 2 = -6.35mm difference from the fender) This will put them at about 23mm ~1" further out than mine are. Luckily they are 18's so you can stretch the tire without much issue. Yes you can make it work, but I still don't think it is a "good" offset for a sedan. (of course you'll probably prove me wrong )
245/40's all the way around I have about -2.6 degrees of natural camber up front and currently have 20x8.5 +20 with a 225/35 tire. I'm putting 15mm spacers on soon so i'll be at +5 and still have room. So the 10 would be an extra 5 mm out, plus 3/4" for the wheel and the tire will be 10mm closer, it'll sit about the same as the 20x8.5 +5. In the rear my fenders are flattened with a 20x8.5 +20 (245/35 tire) and i have about 7mm of room with about -1.5 camber. The 18x10 +15 would be 5mm closer to the fender, tire is the same width but will be stretched, and the lip of the wheel would stick out an extra 3/4".

I'd be perfectly flush Thanks for playing Eddie!

But really, my ideal setup right now would be 18x9.5 +15/18x10 +30 with 255/40 up front and 285/35 out back. I want to try out the aggressive fitment with meaty tires.
Reply 0
Jan 10, 2010 | 12:53 PM
  #5583  
that would be dope grant.
Reply 0
Jan 10, 2010 | 08:50 PM
  #5584  
Quote: that would be dope grant.
I put the 15mm spacers up front on the 20's so i'm at 8.5 +5 with a 225/35... Looks B!TCHIN now, had to raise it up a little bit or my fender sits on the tire on a turn, lol.
-GP-
Reply 0
Jan 10, 2010 | 09:16 PM
  #5585  
Who's G??

http://forums.nasioc.com/forums/show...php?p=28881361
Reply 0
Jan 10, 2010 | 09:16 PM
  #5586  
^^ yup enjoy sir... now i gotta pay mark back lol
Reply 0
Jan 10, 2010 | 09:27 PM
  #5587  
Quote: Who's G??

http://forums.nasioc.com/forums/show...php?p=28881361
ShanesG
Reply 0
Jan 10, 2010 | 09:30 PM
  #5588  
Quote: ShanesG
One word...

Dope.
Reply 0
Jan 11, 2010 | 12:30 AM
  #5589  
just a reminder for everyone this thursday!!!!


Go-Karting Event Whos Down?

DATE SET
January 14th Thursday. Meet up time at 6pm. We will meet up and talk and should start racing at 7pm

Website:
http://www.miramarspeedcircuit.com/index.php
--> they're very car friend, ive seen these meets before--> http://www.miramarspeedcircuit.com/car_shows.php

About The Karts
Our karts are made by SODI: the number one indoor kart maker in the world. The karts are designed with hydraulic brakes, custom frames, adjustable seats and pedals, and all around bumper protection. All karts feature a 6.5hp Honda engine and have been hand crafted for Miramar Speed Circuit. Thanks to a special sealant on our asphalt track and the karts soft racing tires, the karts achieve very high cornering speeds. On our straightaway, they can reach speeds up to 40 mph. You must be at least 60 inches (5 feet) tall to drive these karts.
http://www.miramarspeedcircuit.com/kart_specs.php

Price Range
http://www.miramarspeedcircuit.com/pricing.php
The Promos --> http://www.miramarspeedcircuit.com/promos.php
We can do it on a Tues or Thurs for the promo's or we can day on the weekend.
So depending on the day, figure 20 to 30 bucks. If we want a private session for an hour 1,500 to 1,700. Figure they run races every 6 min, we can get min 6 to 8 races before tim is up. If we get more than 16 people.. that'll be less than 100 bucks for the day and less than 15 dollars per race... trust me these races get tiring, no power steering.





i'm also placing this thread on other forums also, to give us a variety of cars and people to meet and greet. Please dont act like an *** or show off. We should represent our car forum properly.
Reply 0
Jan 11, 2010 | 01:40 AM
  #5590  
yeah, you know it's hard for me to get out on the weekdays... i'll try though.
Reply 0
Jan 11, 2010 | 02:00 AM
  #5591  
haha its on a thursday lol... but if not im planning another one next month at k1 speed... so itll be more convenient on a weekend
Reply 0
Jan 11, 2010 | 02:02 AM
  #5592  
I want to do another dyno day...
Reply 0
Jan 11, 2010 | 08:59 AM
  #5593  
Oop's i meant weekdays!!! LOL
Reply 0
Jan 11, 2010 | 10:38 AM
  #5594  
Dyno day sounds good.
Reply 0
Jan 11, 2010 | 12:03 PM
  #5595  
we can plan another dyno day and go-karting day next month... we will plan it on a weekend.
Reply 0