I'm getting a new key and remote from ebay and need to have the key programmed and cut. Other then paying outrageous dealer fees, are there any shops in the south florida area that can do this for me?

Thanks.

 

I need to do this too, anyone know where?

 

I got a guy at Nissan that does them for 40 bucks. Maybe too far for you guys.

 

I called iocc a couple weeks ago and spoke with parts he said he'd cut it free but was unsure of the programming cost...im guessing an hour or a 1/2 hour of labor?

 

could be wrong but:
Cutting: 5 dolla homedepot style
Programming: Do a search. Something like get in the car, lock the door, manually lock and unlock 5 times, twist the key on the off 10 times and it magically becomes programmed.



Whazam! I reprogrammed an ebay key remote a couple of months ago after losing my keys after a lonnnnng night.

 

Key is Immobilizer. The system must have keys programmed via scan tool. Dealers and locksmiths are about your only option there. Wireless can be programmed with a little key dance. Id be happy to post it up for ya if it helps you.

And just a sidenote: I doubt you are going to find very many, if any independant shops that have made the investement in the equiptment to program nissan keys, so don't kill yourself looking. Its similar to the Toyota and Honda Products, no user programmable features with immobilizer!

Chris

 

Thanks.

I'll call up infiniti and nissan and go with whomever is cheaper.

 

let us know and see if it would be cheaper if more than 1 are done

 

any update on this? Im about to hit up the stealer to get this done before i screw myself

 

Ok, called Esserman Nissan and they said that unless you use one of their keys that they sell to you, they won't do it because if they screw up the cutting of the key, then its out of their pocket to get you another one.

Warren Henry Infiniti said that they will do the programming and I'm assuming cutting too for $120 and you have to provide driver's license and registration of the car.

Sawgrass infiniti said they would do both cutting and programming for $75. Spoke to someone named Richard.

hope this helps.