G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

What rotors and brake pads should I buy for my G35

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Aug 22, 2011 | 08:00 AM
  #1  
zsy7369's Avatar
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 6
Likes: 0
Question What rotors and brake pads should I buy for my G35

Hello, everyone

I just want change my front rotors and brake pads, but I have searched on ebay, all those products are only for brembo edition.
My 03 G35 coupe's brake are stock brake not brembo, so can you tell me what brand peoduct can fit my car



thanks a lot!!!!!
 
Reply
Old Aug 22, 2011 | 08:07 AM
  #2  
zsy7369's Avatar
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 6
Likes: 0
Up up up
 
Reply
Old Aug 22, 2011 | 09:24 AM
  #3  
alpa_chino's Avatar
Registered User
iTrader: (15)
Joined: Sep 2009
Posts: 1,064
Likes: 30
From: Deep in the Heart of, TX
check the vendor marketplace . better stuff and deals then ebay and they know their stuff
 
Reply
Old Aug 22, 2011 | 10:28 AM
  #4  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
DBA rotors are the best on the market for our Infinitis and you have several choices with style. I've been using HAWK HP pads since I got tired of replacing the OE pads every few miles and then there was the issue with all that dust. HAWK HP pads will double the life of your pads! Both the DBAs and HAWK pads are available here on our MARKETPLACE under vendor brakes, you won't find a better price anywhere or quicker delivery.... SEARCH for bed/break in process on the pads, eliminates any noise for the life of the pad!
Gary
 
Reply
Old Aug 22, 2011 | 11:43 PM
  #5  
zsy7369's Avatar
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 6
Likes: 0
Originally Posted by gary c
DBA rotors are the best on the market for our Infinitis and you have several choices with style. I've been using HAWK HP pads since I got tired of replacing the OE pads every few miles and then there was the issue with all that dust. HAWK HP pads will double the life of your pads! Both the DBAs and HAWK pads are available here on our MARKETPLACE under vendor brakes, you won't find a better price anywhere or quicker delivery.... SEARCH for bed/break in process on the pads, eliminates any noise for the life of the pad!
Gary
Thanks a lot! I have two addition question.
1.The non brembo disk size as same as the brembo edition?
2. I can't find the HAWK HP, just finded HPS and HP plus, which one is you talking about?
Thx again
 
Reply
Old Aug 23, 2011 | 12:01 AM
  #6  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
Originally Posted by zsy7369
Thanks a lot! I have two addition question.
1.The non brembo disk size as same as the brembo edition?
2. I can't find the HAWK HP, just finded HPS and HP plus, which one is you talking about?
Thx again
It's the HPS sorry, should have been more specific. Not sure bout the Brembo sizes, don't have them either.
Gary
 

Last edited by gary c; Aug 23, 2011 at 12:12 AM.
Reply
Old Aug 23, 2011 | 05:19 AM
  #7  
zsy7369's Avatar
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 6
Likes: 0
Originally Posted by gary c
It's the HPS sorry, should have been more specific. Not sure bout the Brembo sizes, don't have them either.
Gary
Thx a lot!
I notice that the brake parts from G35 A/T is same as 350Z touring's , right?
 
Reply
Old Aug 23, 2011 | 10:53 AM
  #8  
ThatOneDude's Avatar
Registered User
iTrader: (10)
Joined: Nov 2008
Posts: 1,611
Likes: 182
From: WASHINGTON STATE
Thanks Gary, went and ordered me the HPS immediately xd. Never doubt your info, and my brakes been squeekin' for like a month.
 
Reply
Old Aug 23, 2011 | 01:30 PM
  #9  
gary c's Avatar
Registered User
iTrader: (10)
Joined: Feb 2005
Posts: 19,433
Likes: 1,133
From: Valencia, Ca
Make sure when you install the HAWK pads you do the bed/break in process, that will eliminate any noise by coating your rotors with heated pad material. SEARCH bed in process, if you can't find it give me a PM.
Gary
 
Reply
Old Aug 24, 2011 | 12:25 AM
  #10  
zsy7369's Avatar
Thread Starter
|
Registered User
Joined: Aug 2011
Posts: 6
Likes: 0
Originally Posted by gary c
Make sure when you install the HAWK pads you do the bed/break in process, that will eliminate any noise by coating your rotors with heated pad material. SEARCH bed in process, if you can't find it give me a PM.
Gary



So appreciate, you are a very nice guy.
OK, if I meet some problrm I will PM you.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
silencedeyes
Brakes
6
Nov 26, 2015 05:36 PM
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
kinetek
Brakes & Suspension
9
Aug 3, 2015 04:25 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM
emorehs
G35 Sedan V36 2007- 08
11
Jul 17, 2015 09:45 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 04:59 AM.