Does anyone know how to remove the door from a V35 Coupe?
Tried searching it but all I see is the panel removal for changing the window motor .

 

Remove the front bumper
Then headlight
Remove fender liner
To remove the fender

Once fender is removed disconnect harness
Open the door and remove that thing that holds open the door
12mm and the 2 10mm on the door
Then close the door and remove the 4 12mm bolts holding the door which is heavy


Am I right? I just woke up

 

You can leave the bumper and fender installed it you have two people to help you. I recommend rolling the window down so you can grab the door frame at the top, the door is about 150lbs with the glass installed. Remove the single bolt for the door check, remove the nuts for both hinges, lift the door away from the hinge studs slightly so you can access the door harness connector, there is a pawl and lever assembly to remove it. It's hard to see with the door installed, get a small inspection mirror to look on the backside of it and you'll see what I mean. There's also a picture in the factory service manual under "body, locks, and security".

 

Thanks...
have any pics ?

 

Door check bolt
Harness connector snaps off, tab is on the back side.
Hinge, remove 2x nuts on upper and lower hinge.

 

Dope man...I really appreciate u both .