Here are the BEFORE and AFTER PICS !!! Enjoy !!

<BR><BR><IMG hspace=20 src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_orange_navi.jpg"><IMG src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_bluish_white_navi.jpg"> <BR><BR><IMG hspace=20 src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_orange_1.jpg"><IMG src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_bluish_white_1.jpg"> <BR><BR><IMG hspace=20 src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_orange_3.jpg"><IMG src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_bluish_white_3.jpg"> <BR><BR><IMG hspace=20 src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_orange_2.jpg"><IMG src="http://img.photobucket.com/albums/v206/v_i_s_i_o_n/g_bluish_white_2.jpg"> <BR><BR>

 

you forgot a couple but it looks great!

 

Which ones did he "forget"?

 

nice work man, how long did this take you? and was it expensive for all the materials? you're missing a few orange spots though, like the a/c, compass, key hole, get those and you will have a nice interior! looks mad wicked though....

 

is it me, or does anyone else not see the lights in the needles?

 

Nice Job Vision! Ok now can you do mine?....Don't worry i don't have a NAV so you don't have to worry about plugging it back in....

 

Very nicely done! I've done that before on my old car, and it was a pain, but worth it Nice work

 

Very nice indeed! I also don't see the indicators on the dials. How did you do this? You must create a DIY on this one.......please......with pics.....

 

The AC button is fine the lil orange light indicates if its on I'd leave it. The compass can't be changed unless you wanna redesign the whole HUD. Are you sure thats the keyhole??

 

Thanks everyone, I hadn't had time to buy the Film to do the A/C panel above the clock.

one way is to buy a whole new acrylic piece and replace that one and put a film over it.


or

second way is to cut out the amber stock acrylic and place film over it.

I haven't been able to find where I can get the film, someone said Pep Boys. So I'm going to go check them out and if they do have it then I'll probably go with the 1st way and have custom fitted and filmed. =)

The only other thing left is the Lighter Plug on either side. I did do the Key (ignition) sorry forgot to take a pic of it =) you can see part of the ignition hole LED if you look at the 2nd picture from the top.. look around near the steering wheel it's shows a little piece of it =)





As far as, the buttons (little orange dot and indicates if its "on") those are entirely different LEDs. I didn't want to change them out. I thought those LEDs were pretty pricey cause it all adds up. =) so it'll stay orange.


It took a looong time hehe... better free up a weekend and then some if anyone is planning to take this project on =)

Thanks for everyone input. I appreciate it =) I should have waited till I was "COMPLETELY" done before posting but I couldn't wait hehe... just wanted to share =)

 

good job!

 

beautiful, looks so damn clean