I'm in!

1. Dizz
2. Dsskyline/Derek
3.RedondoG - Terry
4.
5.
6.
7.
8.
9.
10.

 

Have you dynoed with your nitrous yet with the kinetix? Just wondering.

 

1. Dizz
2. Dsskyline/Derek
3.RedondoG - Terry
4.Nuttyprof - Patrick
5.
6.
7.
8.
9.
10.

 

1. Dizz
2. Dsskyline/Derek
3. RedondoG - Terry
4. Nuttyprof - Patrick
5. Randys_G/Randy
6.
7.
8.
9.
10.

So what is it? 3 pulls for $50 AND 1/4 runs? What time?

 

if anyone is wondering the website for the dyno facility it is www.wotperformance.com. I'll see you guys on saturday at what time Dizz?

 

is the rain going to be a factor? Because our wheels will be wet and they might slip on the dyno rollers, right? Come on Dizz, answers, answers! =)

 

1. Dizz
2. Dsskyline/Derek
3. RedondoG - Terry
4. Nuttyprof - Patrick
5. Randys_G/Randy
6. GRider35c/Kia - cheerleading
7.
8.
9.
10.

 

I answered my own questions (well, except for the time question)...You get 3 pulls for $50. If you want 1 pull to be power, 1 pull to be 0-60 and 1 pull to be 1/4 mile, Pete said that's cool. Basically, you can mix and match your 3 pulls. Also, his shop is at 800 ft above sea level, so the 1/4 runs should be really accurate. He can do the 1/4 runs with or without the Christmas tree. COME ON, let's get everyone signed up...oh, and rain will not cancel this event. Pete said the rain won't be a factor at all.

 

If I remember correctly, Glenn said that he usually opens up shop at 10am on Sat. But he mentioned that Pete can get there by 9am if need be.

Let's just say for now, 10am.

Randy, I'll ask Pete about wet wheels.
Edit:
Seems that Sherlock already did his homework unlike myself.

 

That's right Watson! Ask Pete if he ties the cars down or not...that helps with wheel slippage...

 

Watson says:
I remember him mentioning that he does tie the car down. Kinda has to no?
He said the fastest car he's ever dyno'd was a 810hp (mumble) and that was at WOT and it never slipped off.

 

hey i talked to chris at hookups and he said he will accomodate us if we wanted to go there. he will be charging 40 dollars for 6 runs.

"FOR ALL SUBSCRIBED HT MEMBERS ONLY!! HOOK-UPS IMPORT TEK is offering all HT members a discounted rate on dyno runs. Here is the deal, any valid HT member will recieve 6 runs on our 2004 DYNOJET chassis dyno for $40.00. This will include printouts of all 6 runs with HORSEPOWER, TORQUE, AND AIR FUEL RATIO GRAPH! dyno tuning will also be available at a discounted rate to HT members"

so let me know its in upland

 

and we can get the discount and have 6 runs

 

Hey dude, start your own thread. Stop trying to hi-jack this one. We have a place set up for this thread. You are welcome to join, but no bogarting.

 

Hey count me in still as well. I got some good news about my car today. They said that they pulled the plugs and cranked the motor,,,,, they had 6 geysers blowing in the shop! They've been running some tests today and will be doing a compression test just to make sure. But they did say the car seems to be running very smoth. Of course now I've been hoping for a new engine, lol. Any way, if all goes well I'll be running my own car on the dyno and not the loaner. Talk to you all,


Later,

Ray

1. Dizz
2. Dsskyline/Derek
3. RedondoG - Terry
4. Nuttyprof - Patrick
5. Randys_G/Randy
6. GRider35c/Kia - cheerleading
7. RacerX35/Ray
8.
9.
10.