you SURE u wanna go there? i'll run you on the street or track or freeway if u like...maybe with some cash involved?

btw it's low TQ cuz it's a 3.2...and it's a honda...but still higher numbers then you've got as far as HP

Listen... I'm not getting in a pissing contest with you over this cr@p. I'm not bragging about my numbers and obviously downplayed them. You asked for dyno posts so I added mine - NEVER bragging. If you re-read my post I admitted I wasn't satisfied, and have no interest in impressing you! There are TONS of cars out here that will smoke what you're bragging about. Don't waste your time trying to beef yourself up cause I'm done with you after this.

Now go enjoy your 15 year old car.

Woah Nelly, easy there. You dont need to get pissed. My boy X is just trying to see wats out there. And plus his 15 year old car probably runs better than most cars now.

Trust me i know and i have seen them.

His post should have said "who wants to race" not post your dynos... I'm always interested in what other G owners have done to get performance out their cars and what the performance gains are. I've been fortunate enough to have several G owners share their success... I made the mistake of partaking in this forum thinking it was as such.

Unfortunately it's just some non-G owner antagonist wanting to brag about mediocre performance and challenge other people. If you read the series of posts you will see that "your boy" had no interest in sharing info, just starting ****. I should have read between the lines on his very first post. Oh well live and learn.

BTW, I'm not knocking older cars; I owned a 76 280Z for 14 years. My point was he had nothing to share that G35 owners could benefit from (and visa versa).

Actually he isnt braggin, he is a good friend of mine and he came to the stillen meet and met some of the other G owners. He is just messin around and is a car nut like everyone else. He likes to know more info about others and possibly help me out because he knows alot of people in the industry.

Have you even read all the posts in this thread?... He opened by asking people to post dyno's stating "I wanna see watcha got"... then when he sees a couple he makes some comment about why so little power... He had no interest in "helping" anyone do anything (at least on this thread) - instead he post modest dynos as if he's got the fastest **** around (which he absolutely does not). Instead of realizing my perspective, he challenges me to race! WTF!!!

I understand he's your friend, but give me a break, this thread is pointless, and I'm done posting here.

I'll have to back up OCG35. Your "friend" is acting like a douche bag! This shouldn't be an I'm better than you forum, rather a place where fellow enthusiasts actually support each other. Lame!

this turned into a $H!t storm! who cars how much HP you have its if you know how to use it

I need to get dyno'd

Here are my dyno results in stages of mods. The first is with just a borla exhaust TS reflash, stillen cab and grounding wires. The dyno pulls were done on the same dyno with my 18's not my 19's. I have the graphs, but I rather post the rpms, hp and torque #'s for everyone to look at.

Sorry for posting the dyno above backwards. The dyno on 4/16 is after I installed my crank pulley. The torque #'s are high at first due to my torque converter.
The last dyno on 5/18 are after I installed my HF cats and Kinetix V4 plenum. Disregard the A/F on the last one something was wrong with the monitor.

Right on, thanks for sharing... looks like even though the TS reflash over-rides the rev limiter, the engine still backs off after 6500... I'm looking forward to getting my ECU done, do you think it was worth it?

Thanks for the support Inno - at least some people have the same intentions that I had... Hopefully this can turn beneficial for all of us after all!

Discard my previous... it makes more sense now when you posted the second time. DaveO has a torque converter too and has huge torque... looks as though it's definitely beneficial! So now new question (forget the TS ECU questions before, the new post makes sense and I'm getting it done) - I'm far less familiar with TQ converter, since not many people talk about it... how much and where? I presume you feel it was worth it (can't see how not), so I won't ask that this time.

Thanks again for sharing.

I hate to say it, but he's right. This was supposed to be a post your dyno sheet thread, not a "I'll zmokeeee you" thread. Too many topics in SoCal shift away from what was meant to be talked about.

My torque conveter is stock. A think a aftermarket torque converter is good if you like to race because you can brake torque higher to launch. I plan on getting one I think DaveO got his from edge racing. I don't know why I pulled so low at stillen 253hp and 232tq. I think it's because I have the kinetix with the 3/8 spacer and it was causing me to ping bad maybe because of too much air. (I could be wrong) I took the spacer off when I got home from stillen and it pulls stronger now (butt dyno) .