WTT[SoCal]: Tanabe GF210 lowering springs trade for stock

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Mar 14, 2011 | 02:58 PM
  #1  
sinasajadi's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 114
Likes: 0
From: SoCal (San Diego)
Tanabe GF210 lowering springs trade for stock

Hello,

I would like to know if anyone is interested in swapping springs with me. I would like to go back to stock so if anyone is interested in lowering their car with great springs let me know. I have Tanabe GF210 and I want stock g35 springs. Installation will be around $100-$120

I am located in San Diego, CA

call or text anytime 858 610 6397

Simon

Description:

Drop Rate F/R: 1.5/0.9

The GF210 coil spring is geared towards maximum performance, without compromising daily driveability. A subtle drop provides an aggressive stance, while the higher spring rates (+20% - 30% over stock) provide excellent handling and vehicle stability characteristics. These springs provide a very noticeable gain in performance when installed.

The GF210 is well mated with a performance shock upgrade to extract the full potential of the coil spring, but will also work with factory equipment.






Simon
858 610 6397
 
Attached Thumbnails Tanabe GF210 lowering springs trade for stock-img_20110204_164939.jpg   Tanabe GF210 lowering springs trade for stock-img_20110204_164950-1-.jpg   Tanabe GF210 lowering springs trade for stock-img_20110204_165527.jpg  
Reply
Old Mar 14, 2011 | 03:39 PM
  #2  
Jevangel's Avatar
Registered User
iTrader: (8)
Joined: Sep 2009
Posts: 166
Likes: 0
From: Portland, OR
Are these springs the 350Z version? I got a set of OEM springs I can ship down to you if you're interested. Then you can ship the Tanabe's up to me when you remove them.
 

Last edited by Jevangel; Mar 14, 2011 at 03:43 PM.
Reply
Old Mar 14, 2011 | 04:14 PM
  #3  
sinasajadi's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 114
Likes: 0
From: SoCal (San Diego)
Im not sure If they are the 350z version. they might be.

Im was actually thinking it would be easier to just swap with someone local.

but thanks though
 
Reply
Old Mar 14, 2011 | 06:20 PM
  #4  
BigOgre's Avatar
Registered User
iTrader: (5)
Joined: May 2010
Posts: 406
Likes: 4
From: SoCal!
I would be down if you were closer to me..
 
Reply
Old Mar 14, 2011 | 06:22 PM
  #5  
sinasajadi's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 114
Likes: 0
From: SoCal (San Diego)
well I can meet at Long Beach, I know of a shop over there that would do the whole swap for $140

let me know text me

858 610 6397
 
Reply
Old Mar 15, 2011 | 03:38 AM
  #6  
Captain Supreme Sausage's Avatar
Registered User
iTrader: (73)
Joined: Mar 2009
Posts: 5,874
Likes: 451
From: Downey, CA
my buddy has a z and is looking into getting some springs, me and my buddy can cover the labor instead of paying the 140, lmk if you are interested.
 
Reply
Old Mar 15, 2011 | 03:39 AM
  #7  
Captain Supreme Sausage's Avatar
Registered User
iTrader: (73)
Joined: Mar 2009
Posts: 5,874
Likes: 451
From: Downey, CA
can do the installation** instead of paying 140.
 
Reply
Old Mar 15, 2011 | 02:05 PM
  #8  
sinasajadi's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 114
Likes: 0
From: SoCal (San Diego)
pm sent
 
Reply
Old Mar 15, 2011 | 07:25 PM
  #9  
jumbaco's Avatar
Registered User
iTrader: (2)
Joined: Dec 2006
Posts: 233
Likes: 44
From: SoCal
won't G35 springs installed on a 350z raise it up or not give it a drop at all?
 
Reply
Old Mar 16, 2011 | 03:29 AM
  #10  
G'dUpFrmFeetUp's Avatar
Registered User
iTrader: (1)
Joined: Jan 2011
Posts: 153
Likes: 2
From: SGV
I might be down to meet in long beach if these are still available
 
Reply
Old Mar 23, 2011 | 12:58 AM
  #11  
sinasajadi's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Sep 2008
Posts: 114
Likes: 0
From: SoCal (San Diego)
hey mods please close this thread

car has been sold!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
paolojericho11
Wheels & Tires
11
Sep 11, 2015 07:08 AM
Buggzb86
Drivetrain
0
Jul 25, 2015 11:22 PM
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 11:37 PM.