FS[NorEast]: Tein s.tech lowering springs for g35 coupe
#1
Tein s.tech lowering springs for g35 coupe
I bought these S.TECH springs for my '03 Sedan and then decided to go with the Z/G suspension combo instead. I bought them for $175 and am unloading them to recover some cash.
$100 - Picked up
$135 - Shipped
$100 - Picked up
$135 - Shipped
Last edited by S 854; 10-15-2011 at 01:31 PM.
#7
Trending Topics
#10
#11
#12
Here's the Mfgr Spec link http://www.tein.com/tech_info/p30.html.
As far as installation goes you would need to drop the front struts to replace the springs. They usually recommend that you replace the Strut mount caps when you do that. When I did mine strut mount caps cost $35 each.
The rears are easier, just release the rear shock ease the suspension down with a jack, replace the spring and jack it back up. Here are two great DIY's on the proceedure.
Rear:
Front: http://infinitihelp.com/diy/gsedan/p..._procedure.htm
Hope that helps.
PS..I'm heading out of town tomorrow be back Wednesday.
As far as installation goes you would need to drop the front struts to replace the springs. They usually recommend that you replace the Strut mount caps when you do that. When I did mine strut mount caps cost $35 each.
The rears are easier, just release the rear shock ease the suspension down with a jack, replace the spring and jack it back up. Here are two great DIY's on the proceedure.
Rear:
Front: http://infinitihelp.com/diy/gsedan/p..._procedure.htm
Hope that helps.
PS..I'm heading out of town tomorrow be back Wednesday.