Noob s/c tuning questions
Joined: Aug 2008
Posts: 387
Likes: 0
From: Noblesville, IN
Noob s/c tuning questions
I finally am breaking down and going for more power. I got to meet the R&D head of stillen this week who single handedly designed the VQ37 S/C kit, and he got me itching for more power.
I tried searching but it was pretty hard to find any specifics on what i am asking about.
First i am going to get DW 600cc inj and im debating between the Warlbo FP and the new DW pump. Im sure the DW pump is over kill but the guy from stillen was raving about DW products.
Second, i already have a boost gauge and im getting a wideband gauge and oil pressure. What type of line are you guys using for your oil pressure? Ive heard horror stories about the nylon line leaking. Did anyone put another T-fitting on the existing T for the feed line for the S/C?
I will either be buying Osiris or using the Osiris that we have been using for the S/C g37 we have if possible. I know a wideband is critical, is a single WB ok or should i get a dual like this? dumb question but this will work to log with osiris, correct? It said in the description that it should.
http://www.injectedperformance.com/h...trollerkit.htm
Where do you mount the wb O2's? I would assume weld on a bung but at the front of the y pipe, but in reading about Osiris, i saw that it is possible to turn off the checking for dtc's (rear O2's) so could i then just install them where the rear o2's are normally mounted?
I tried searching but it was pretty hard to find any specifics on what i am asking about.
First i am going to get DW 600cc inj and im debating between the Warlbo FP and the new DW pump. Im sure the DW pump is over kill but the guy from stillen was raving about DW products.
Second, i already have a boost gauge and im getting a wideband gauge and oil pressure. What type of line are you guys using for your oil pressure? Ive heard horror stories about the nylon line leaking. Did anyone put another T-fitting on the existing T for the feed line for the S/C?
I will either be buying Osiris or using the Osiris that we have been using for the S/C g37 we have if possible. I know a wideband is critical, is a single WB ok or should i get a dual like this? dumb question but this will work to log with osiris, correct? It said in the description that it should.
http://www.injectedperformance.com/h...trollerkit.htm
Where do you mount the wb O2's? I would assume weld on a bung but at the front of the y pipe, but in reading about Osiris, i saw that it is possible to turn off the checking for dtc's (rear O2's) so could i then just install them where the rear o2's are normally mounted?
Registered User
Joined: Jun 2010
Posts: 43
Likes: 0
Belive me they are fine for that if you watch how quickly they react
during tuning you would see and go check out the ones they use they are Bosch 02 sensors
15667 and seem to be better than most in after-market kits.
Read up on up-rev or contact jared there and get the straight answer.
but by far I have found up-rev great and vince at RTTuning great.
during tuning you would see and go check out the ones they use they are Bosch 02 sensors
15667 and seem to be better than most in after-market kits.
Read up on up-rev or contact jared there and get the straight answer.
but by far I have found up-rev great and vince at RTTuning great.
Thread
Thread Starter
Forum
Replies
Last Post