i can get a really good deal on some 21 inch dornells 2 piece 5 star design but do not think they will fit. any help would be great thanks. sorry i forgot to mention it is a lease so i cant mess with rolling the fenders etc. thanks.

 

dont make the wheels fit the car ... make the car fit the wheels

stretched tires ... negative camber and fender rolling should help

 

yeah i know but im leasing it so cant really do all that thanks.

 

fenders are already rolled on our cars
but ya they should work fine
but u need a drop so your camber will be negative or it'll rub

 

21 should fit no problem without dropping the car.

It all depends on calculations with offsets, tire sizes, and wheel width.

Good luck!

 

Yes. As long as you have the correct offset and tire size, 21x10" rims will fit in the rear with no problems. 21x10 up front would be pushing it. I wouldn't go wider than 9" up front.

On a 10" rim, you can run offsets from +50 for conservative to about +40 or even lower if you run enough camber and stretch your tires.

Here's a link to "The Punisher's" lowered G35 with 22" rims - check out page 3 for more pictures:

https://g35driver.com/forums/picture...0-car-22s.html

 

I'm getting a set of wheels with 9.5 +35 and 10.5 +37 soon.

It would require some negative camber with some height adjustment from my coils... but I'll make it work for sure... hahaha BTW, I won't go any more negative than -2.0 on camber.

 

wow thanks for all the help this forum is very good for questions. the set im looking at are 21x9 front with 245/35/21 and the rears are 21x10 295/35/21 i think the back tire will be to large with keeping everything stock right also heres a pic tell me what you think thanks. also i believe the offerst are +35 only will that work im pretty new to the offsets and camber and all that thanks sorry for so many questions.

http://thumbp1.mail.sp1.yahoo.com/tn...=453&fid=Inbox

 

35 profile tires would be pushing on 21 inch wheels... let along the 295 width tires!...

But again... it might be okay if you're not lowering your ride....

 

21x9 +35 245-35-21 MIGHT work up front w/o lowering. It's literally 1" larger overall than stock.

I wouldn't attempt 21x10 +35 295-35-21 at all. That will most likely rub and will definitely stick out the wheel well.

What I suggest is to just run 21x9 +35 at all 4 corners. That should be fine.

 

yeah i would love to do that but im getting them used for like $600 with new pirelli tires.