I have 19x10.5 rear wheels. My rear camber is -1.9. Is this ok? Can I get away with not getting a camber kit? Or do I really need one.

Your thoughts?

 

Is that after an alignment where they adjusted all the way in? You can drive like that, but you're definitely going to be buying tires sooner.

 

Yes, that after an alignment

 

Do a cost benefit analysis of the price of your tires with (at least) 30% less wear requiring earlier replacement vs. the cost of an installed camber kit and another alignment.

 

idk about sedans but my camber is 1.3 after alignment with the camber kit.. what is the stock specs for sedans?

 

This is from the service manual with all fluids being full including fuel.

Minimum –1° 05′ (–1.08°)
Nominal –0° 20′ (–0.33°)
Maximum 0° 25′ (0.42°)
Left and right difference 0° 33′ (0.55°) or less



ETA: THE ABOVE NUMBERS ARE FOR THE FRONT WHEELS, HERE ARE THE REAR SPECS

Applied model
Camber
Degree minute (Decimal degree)
.....................................2WD
..................Without 4WAS.....With 4WAS...........AWD
Minimum –1° 20′ (–1.33°) –1° 25′ (–1.42°) –0° 45′ (–0.75°)
Nominal –0° 50′ (–0.83°) –0° 55′ (–0.92°) –0° 15′ (–0.25°)
Maximum –0° 20′ (–0.33°) –0° 25′ (–0.42°) 0° 15′ (0.25°)