i was wondering some of you guys installed a staggered setup with 20x10 with offset of 40 on rears.... i wanted to know if some of you are experiencing rubbing with full load of passengers and also lowered with tein s-techs?
Registered User
That'll fit with some neg camber. What size tires? I have 20x10 +45 with 285/30 tires and Eibach springs. The camber is completely in spec. No probs now, but just by eyeballing it I can tell if I went +40, I'd need a bit of out-of-spec neg camber.
Registered User
My new wheels i have the same offset and width, i just didn't install them yet, but the person i bought them from he had tein 350z S techs and he didn't rub with that drop
Registered User
I ran 19x10 +35 with 275/35/19 tires and did not rub. You have 5mm more clearance. you will be ok.
Here is a pic for reference:


Here is a pic for reference:


Registered User
i have 20x10 45mm offset. and i only rub if i put 2 people in the back. but if i roll my fenders i wont rub at all. and that is with my camber being exactly where it is supposed to be
285 on 20 x 10 +48 will not rub with camber in spec. no matter what kinda load you have.

It's a 2007. I test fitted a 20x10 offset 30 and it sticks an inch out. So I think I'll be good with a 40 offset
