20x10 offset 40....

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 29, 2010 | 06:36 PM
  #1  
curby4's Avatar
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 26
Likes: 0
20x10 offset 40....

i was wondering some of you guys installed a staggered setup with 20x10 with offset of 40 on rears.... i wanted to know if some of you are experiencing rubbing with full load of passengers and also lowered with tein s-techs?
 
Reply
Old Jan 29, 2010 | 06:58 PM
  #2  
CalsonicVQ's Avatar
Registered User
iTrader: (1)
Joined: Feb 2007
Posts: 665
Likes: 0
From: Bay Area, CA
That'll fit with some neg camber. What size tires? I have 20x10 +45 with 285/30 tires and Eibach springs. The camber is completely in spec. No probs now, but just by eyeballing it I can tell if I went +40, I'd need a bit of out-of-spec neg camber.
 
Reply
Old Jan 29, 2010 | 07:22 PM
  #3  
mj_39's Avatar
Registered User
iTrader: (5)
Joined: Aug 2009
Posts: 382
Likes: 16
From: Vancouver B.C
^^ you shouldn't have any problems! with a 275/30
 
Reply
Old Jan 29, 2010 | 07:59 PM
  #4  
curby4's Avatar
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 26
Likes: 0
yeah i was thinking about 275/30..but it shouldnt rub with passengers in the car?
 
Reply
Old Jan 29, 2010 | 10:03 PM
  #5  
04G35NYC's Avatar
Registered User
iTrader: (17)
Joined: Jun 2006
Posts: 4,842
Likes: 78
From: Brooklyn,NY
My new wheels i have the same offset and width, i just didn't install them yet, but the person i bought them from he had tein 350z S techs and he didn't rub with that drop
 
Reply
Old Jan 29, 2010 | 10:10 PM
  #6  
heyitsalex's Avatar
Registered User
iTrader: (1)
Joined: Mar 2006
Posts: 637
Likes: 3
you will not rub and you do not need neg camber.
 
Reply
Old Jan 29, 2010 | 10:20 PM
  #7  
curby4's Avatar
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 26
Likes: 0
any of you have pics for me to see?
 
Reply
Old Jan 29, 2010 | 10:47 PM
  #8  
heyitsalex's Avatar
Registered User
iTrader: (1)
Joined: Mar 2006
Posts: 637
Likes: 3
I ran 19x10 +35 with 275/35/19 tires and did not rub. You have 5mm more clearance. you will be ok.

Here is a pic for reference:

 
Reply
Old Jan 30, 2010 | 04:39 PM
  #9  
curby4's Avatar
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 26
Likes: 0
wont it stick out 5mm more?
 
Reply
Old Jan 30, 2010 | 06:22 PM
  #10  
mj_39's Avatar
Registered User
iTrader: (5)
Joined: Aug 2009
Posts: 382
Likes: 16
From: Vancouver B.C
no yours will sit in 5mms, the lower the offsets the more they stick out
 
Reply
Old Jan 31, 2010 | 01:37 AM
  #11  
kennymo's Avatar
Registered User
iTrader: (22)
Joined: Sep 2009
Posts: 3,205
Likes: 23
From: bay area
i have 20x10 45mm offset. and i only rub if i put 2 people in the back. but if i roll my fenders i wont rub at all. and that is with my camber being exactly where it is supposed to be
 
Reply
Old Jan 31, 2010 | 03:39 AM
  #12  
mj_39's Avatar
Registered User
iTrader: (5)
Joined: Aug 2009
Posts: 382
Likes: 16
From: Vancouver B.C
^ 1st gen sedan?
 
Reply
Old Jan 31, 2010 | 11:05 AM
  #13  
terrycs's Avatar
Registered User
iTrader: (54)
Joined: Dec 2006
Posts: 3,519
Likes: 32
From: Southern California
Premier Member

285 on 20 x 10 +48 will not rub with camber in spec. no matter what kinda load you have.
 
Reply
Old Jan 31, 2010 | 04:41 PM
  #14  
curby4's Avatar
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 26
Likes: 0
It's a 2007. I test fitted a 20x10 offset 30 and it sticks an inch out. So I think I'll be good with a 40 offset
 
Reply
Old Jan 31, 2010 | 04:44 PM
  #15  
kennymo's Avatar
Registered User
iTrader: (22)
Joined: Sep 2009
Posts: 3,205
Likes: 23
From: bay area
Originally Posted by mj_39
^ 1st gen sedan?

mine is yes
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davizzle
Media Share G35 Coupe V35
23
May 22, 2022 09:26 AM
seagrasser
G35 Cars
17
May 3, 2022 09:43 AM
davizzle
Picture Share
23
Feb 4, 2018 12:41 PM
alxmlr789
20 Inch
9
Jan 26, 2016 10:04 AM
TurTLe*
G35 Sedan V35 2003-06
5
Sep 29, 2015 01:43 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:03 AM.