Finally BCs are installed. wow it's too low.
#1
Finally BCs are installed. wow it's too low.
I have to make some adjustments tomorrow. Right now it's as low as it will go the fronts. the rears can still go lower It was quite a project b/c it's so freaking hot. I couldn't find a tape measure so I couldn't measure. Can someone give me some numbers to shoot for. I found some people are about 13.5 inches from center of wheel to fender. It took some time b/c it was hard to elongate the bolt holes for the new toe bolts that came with the spc camber kit. I only put the camber kit in the rear. I was told i don't need it in the front
here are the pics. sorry it got late. I m old. 39
I can't wedge my finger between the fender the tire. My wheels will be done in a week but I will be out of town so I won't be able to install them for 2 weeks.
here are the pics. sorry it got late. I m old. 39
I can't wedge my finger between the fender the tire. My wheels will be done in a week but I will be out of town so I won't be able to install them for 2 weeks.
#7
Super Moderator
iTrader: (38)
That's the beauty of having coils - you can always adjust that height besides the firmness - just too pooped to get back under the lift tonight eh?
What's the height from the ground to the top middle of the fender - like 26"? 24" is slammed and then some. 25" - 26" is pretty low but manageable.
When I dropped low, I also took off my mudguards and splashguards. Sedan looks much better without them besides.
What's the height from the ground to the top middle of the fender - like 26"? 24" is slammed and then some. 25" - 26" is pretty low but manageable.
When I dropped low, I also took off my mudguards and splashguards. Sedan looks much better without them besides.
Trending Topics
#8
I think it looks good... You minimized the wheel gap and not tucking... Thats what I was shooting for when i put my coils on... I'm still on stock 17's but I may go lowere when I get some wheels...
I'd like to mention that my ride is comfy and I don't scrape on anything (but I do try to avoid speed bumps at all times if possible)...
I'd like to mention that my ride is comfy and I don't scrape on anything (but I do try to avoid speed bumps at all times if possible)...
#9
#10
I know I need some front camber kit. I just hope I don't have to drill anything in the front. I still have some metal shavings in my head.
#11
- just too pooped to get back under the lift tonight?
Ufc132 is on
What's the height from the. ground to the top middle of the fender - like 26"? 24" is slammed and then some. 25" - 26" is pretty low but manageable
I don't have tape.
When I dropped low, I also took off my mudguards and splashguards. Sedan looks much better without them besides.[/QUOTE]
Ufc132 is on
What's the height from the. ground to the top middle of the fender - like 26"? 24" is slammed and then some. 25" - 26" is pretty low but manageable
I don't have tape.
When I dropped low, I also took off my mudguards and splashguards. Sedan looks much better without them besides.[/QUOTE]
#15