AWD powertrain fluid drain
Registered User
Joined: Mar 2006
Posts: 842
Likes: 95
G35x
https://g35driver.com/forums/v36-diy...uid-drain.html
"2. Transfer Case: Tcase is located behind the auto transmission. fill plug is 10mm hex, drain nut is 1/2 nut square nut. my breaker bar uses 1/2 nut square end so it worked out. again remove fill plug first THEN drain plug. remember this isnt thick like diff fluid; it is actually a form of ATF(very thin) and since drain hole faces you instead of the ground be ready for the fluid to shoot out. drain nut from factory does not use any crushwasher instead has RTV silicone on the threads. i personally didnt bother as the older goop was on there thick so it didnt leak for me but you should be ready with new RTV incase. reinstall drain nut then pump in fluid until it leaks out (i used nissan matic-D). about 1.5q went in."
"2. Transfer Case: Tcase is located behind the auto transmission. fill plug is 10mm hex, drain nut is 1/2 nut square nut. my breaker bar uses 1/2 nut square end so it worked out. again remove fill plug first THEN drain plug. remember this isnt thick like diff fluid; it is actually a form of ATF(very thin) and since drain hole faces you instead of the ground be ready for the fluid to shoot out. drain nut from factory does not use any crushwasher instead has RTV silicone on the threads. i personally didnt bother as the older goop was on there thick so it didnt leak for me but you should be ready with new RTV incase. reinstall drain nut then pump in fluid until it leaks out (i used nissan matic-D). about 1.5q went in."
Thread
Thread Starter
Forum
Replies
Last Post
