New Tuner! Hypertech "Hypermax" for G35-G37!!
#47
#48
MMMM Base line is really low.. I have seen 256-265 baseline on AWD. Thats show you lossing 86hp and 65TRQ in drivetrain loss, I think that may be wrong.. On a side note I did some pulls (20-100mph) last night against a modded( Intake+exhasut) 300C Hemi(320hp) and pulled on him and held my own. Rolling pulls first gear( Manual mode).. Yes closed track
#53
Registered User
iTrader: (9)
just got back. ill try and post the graphs but the dyno was acting funny.
Baseline was 220hp and 197lbs/tq to the wheels...keep in mind AT and AWD
After hypertech: 227hp and 202lbs/tq to the wheels
+7hp +5 lbs torque
I not convinced the numbers are right. The torque seems a bit low.
Baseline was 220hp and 197lbs/tq to the wheels...keep in mind AT and AWD
After hypertech: 227hp and 202lbs/tq to the wheels
+7hp +5 lbs torque
I not convinced the numbers are right. The torque seems a bit low.
Thanks for doing this!
#54
#56
I believe it was third. we could have gotten some more power out of the high end but didnt push it.
Baseline:
86(hp loss to the wheels) divided by 306 = 28% in drivetrain loss.
71(tq loss to the wheels) divided by 268 = 26.5% in drivetrain loss
thats about right for an AWD Automatic, correct?
Baseline:
86(hp loss to the wheels) divided by 306 = 28% in drivetrain loss.
71(tq loss to the wheels) divided by 268 = 26.5% in drivetrain loss
thats about right for an AWD Automatic, correct?
Last edited by bat6wc; 01-21-2010 at 03:43 PM.
#57
#59