3 is good ... but 4 is better
Registered User
Joined: Nov 2006
Posts: 143
Likes: 0
From: SF Bay Area
Originally Posted by ON_6MT
since i know there are questions on this
here is how to tap the amp -
I tapped the rear door speaker amp outputs and it works great as the amp has a built in crossover.
Attached diagram
Look for this plug on the back of the bose amp.
Wires:
18 - LR(+) - ?dont remeber
19 - LR (-) - ? purple
31 - RR (+) - ?light green
32 - RR (-) - ?yellow
the colours are by my memory as for the wiring diagram includes one letter abbreviations that arent too useful.
Enjoy
here is how to tap the amp -
I tapped the rear door speaker amp outputs and it works great as the amp has a built in crossover.
Attached diagram
Look for this plug on the back of the bose amp.
Wires:
18 - LR(+) - ?dont remeber
19 - LR (-) - ? purple
31 - RR (+) - ?light green
32 - RR (-) - ?yellow
the colours are by my memory as for the wiring diagram includes one letter abbreviations that arent too useful.
Enjoy
In looking at the wires and the diagram, can somone confirm that the diagram is a view of the connector side that is flat. (contact side) Basically pulling it out of the socket and turning it to view the pins?
The reason I ask is that the wire colors don't match if I view this way.
Thanks.
Originally Posted by bertmauricio
In looking at the wires and the diagram, can somone confirm that the diagram is a view of the connector side that is flat. (contact side) Basically pulling it out of the socket and turning it to view the pins?
The reason I ask is that the wire colors don't match if I view this way.
Thanks.
The reason I ask is that the wire colors don't match if I view this way.
Thanks.
I think he doesn't have NAV, so if you do there's a very good chance that nothing will match...
Thread
Thread Starter
Forum
Replies
Last Post