How to Remove Keyhole Cover
#1
#2
i have not worked on any g35 but i think on the inside of the door there is a round cover that you pop off. inside the cover you will find you can see the other side of the handle. you will unscrew the torks head screw and the cover will pop out when you unscrew it all the way. the screw will not fall out because it has a holder for it so dont try and pull it out
#4
#6
#7
Trending Topics
#10
SWEET! Thanks!
Instructions for removing driver's side keyhole cover; Give a real clean look:
1st - Locate the black cap on the inside of the driver's door (see pic)
2nd - Pop off cap; locate hex screw; difficult I know:
3rd - Use 5/32" hex rench to unscrew bolt (won't fall into door; has a saftey lip)
4th - Pop off keyhole cover (forgot to take pic); replace with new cover (also forgot to take pic)! Should look like this when done:
Instructions for removing driver's side keyhole cover; Give a real clean look:
1st - Locate the black cap on the inside of the driver's door (see pic)
2nd - Pop off cap; locate hex screw; difficult I know:
3rd - Use 5/32" hex rench to unscrew bolt (won't fall into door; has a saftey lip)
4th - Pop off keyhole cover (forgot to take pic); replace with new cover (also forgot to take pic)! Should look like this when done:
#11
Yeah, I tried to just pop the cover off after lifting the handle; pretty hard to do. Didn't want to break anything. This way was slightly more work, but took all but 10min (tops). Much easier to pull the old cover out, pop it off, the put the new one on. Either way, easy mod after thinking about it! Thanks again simpson!
#12
#14
Damn ... wish I knew about that bolt! I'm one of the unlucky ones that scratched my car (not too bad though)!
Originally Posted by kmuniz78
SWEET! Thanks!
Instructions for removing driver's side keyhole cover; Give a real clean look:
1st - Locate the black cap on the inside of the driver's door (see pic)
Attachment 92497
2nd - Pop off cap; locate hex screw; difficult I know:
Attachment 92498
3rd - Use 5/32" hex rench to unscrew bolt (won't fall into door; has a saftey lip)
Attachment 92499
4th - Pop off keyhole cover (forgot to take pic); replace with new cover (also forgot to take pic)! Should look like this when done:
Attachment 92500
Instructions for removing driver's side keyhole cover; Give a real clean look:
1st - Locate the black cap on the inside of the driver's door (see pic)
Attachment 92497
2nd - Pop off cap; locate hex screw; difficult I know:
Attachment 92498
3rd - Use 5/32" hex rench to unscrew bolt (won't fall into door; has a saftey lip)
Attachment 92499
4th - Pop off keyhole cover (forgot to take pic); replace with new cover (also forgot to take pic)! Should look like this when done:
Attachment 92500
Last edited by terrycs; 07-05-2008 at 06:46 PM.