Invisicord installation in a 2008 Infiniti G35
Originally Posted by bfranks
It should turn off when you turn the car off. It sounds like you got the always on 12v instead of the switched 12v.
Originally Posted by TaBzRx
Once you go arrows, you never go back - V1 ftw!
True, true..... I Love having the arrows, but having a radar makes me feel like I CAN drive faster, so i do.... Needless to say, I got 2 tickets in 1 month, darn lasers and instant on radars.... Oh well, works great on the highway though
Registered User
Joined: Jan 2008
Posts: 321
Likes: 1
From: Houston TX
Registered User
Joined: Jun 2008
Posts: 918
Likes: 3
From: Chandler AZ
you have to drive 'good' with a new radar detector for a month or so until you get to 'know' it and learn to know what it's telling you. Once your familiar with a radar detector, you can determine what threats exist and at what level.
Registered User
Joined: Jun 2008
Posts: 148
Likes: 1
Originally Posted by bfranks
Registered User
Joined: Apr 2007
Posts: 239
Likes: 7
From: OKC
Originally Posted by KC300C
Thanks for the install instructions. It works perfectly. The only thing I wish was that the detector would turn off when I turn the car off.
Sorry to bring up an old thread - I plugged the 'hot' wire into the gray slot and it powered on as well. The only difference between the brown and the gray wire was that the voltage reading on my Solo S2 - 12.5V vs 12.7V respectively. Thoughts?
2008: brown = switched 12v, green = always on 12v, black = ground.
2007: pink/black = switched 12v, red/black = always on 12v, black = ground.
For 2008 model, Invisicord installation goes as follows:
Put the yellow colored invisicord probe into brown. Put the black color invisicord probe into black.
For 2007 model, Invisicord installation goes as follows:
Put the yellow colored invisicord probe into pink/black. Put the black color invisicord probe into black.
Works perfectly as I've done it both in my 07 and 08.
2007: pink/black = switched 12v, red/black = always on 12v, black = ground.
For 2008 model, Invisicord installation goes as follows:
Put the yellow colored invisicord probe into brown. Put the black color invisicord probe into black.
For 2007 model, Invisicord installation goes as follows:
Put the yellow colored invisicord probe into pink/black. Put the black color invisicord probe into black.
Works perfectly as I've done it both in my 07 and 08.
thanks!
Thread
Thread Starter
Forum
Replies
Last Post
rezendvous420
G35 Sedan V35 2003-06
10
May 31, 2020 01:26 PM
newbdriver01
G35 Cars
2
Jul 15, 2015 06:10 PM
