I bought 4 LED strips for foot area illumination, (strip of leds with + and - wires on the end)
Where can i tap into to power this? i need a 12v power source..
My plan is to put 1 each where foot rests, 2 in the front and 2 in back
Discreet is key.
Can anyone help me out? Also, how i would hide my wiring....
any help would be great
thanks.

 

you could tap into a 12V switched fuse at the fuse box in the kick panel by the drivers dead pedal, then just hide your wires in the kick panels. it is going to be a PITA though. you know Infiniti sells an ambient lighting kit from the factory.. it plugs straight in i believe. riverside infiniti has it for a little over 200 i think

 

Depends on how you want them to turn on. If you are just after power you can actually in many cases just pull out a fuse, put in a fuse tap and replace your fuse.

 

bump. pushed it off and coming back to it now.
i would like them on via a switch or when headlights are in use.
i know nothing abotu fuses etc so any detailed help would be great.