to stop that sticker from coming off you have to get clear water sealent...

goto homedepo and ask for clear water sealent....make sure it will bond w/ metal...

i had that problem on car models...=P


*pipes +15rwhp

 

Haven't had any trouble w/ the "O" my NISMO Wheel stickers coming off. Thats kinda' weird just the "O" in NISMO is coming off. I've got a good coat of wax on them but may go ahead & try that clear water sealant.
Is that like a Clear Urethane, got a Name Brand?
A Pic with the Flush Center Caps...
Thanks

<P ID="edit"><FONT class="small"><EM>Edited by RugRatCoupe on 01/14/04 07:21 PM.</EM></FONT></P>

170828-P1080033.JPG

 

one more...check out my new mods, see Pics in the "RIDES" Section under RugRatCoupe...

<P ID="edit"><FONT class="small"><EM>Edited by RugRatCoupe on 01/14/04 07:52 PM.</EM></FONT></P>

170864-P1080049.JPG

 

Those wheels look awesome!
i think ill order some..

the sealent brand i dont have but any hardware store should have some...


*pipes +15rwhp

 

Thanks-Man... I got these 19" NISMO's at www.gruppe-s.com
I also got my NISMO Sway-Bars from these guys. I would Highly recommend them.
Take-Care,
Rick

 

Front View...

<P ID="edit"><FONT class="small"><EM>Edited by RugRatCoupe on 01/14/04 09:38 PM.</EM></FONT></P>

170937-P1080054.JPG

 

interms of swaybars i want to get cusco because of the stiffer rear end...and i think it would get more rear end stability...

last pic looks great .. do u have any in super high resolution to fit my backround...

1600x1200? or 1600x1042


*pipes +15rwhp

 

Are those Wheels Tire Pressure Sensor compatible?

Whats the difference with the 19x9.5 and the 19x10.5? Bigger lip?

RugRat: Did you change your suspension for those wheels as well? Or could I just use the stock setup?

Twilight Blue G35 Coupe 6MT
Premium - Nav - Aero - Trunk Mat
Injen CAI

 

Yea, you can use the tire Presure Sensor on the LMGT-4's.
Haven't seen the 10.5" NISMO's, Like to...

 

hey rugrat, did u paint your rear bumper inbetween the exhaust?? b/c its black now, looks really nice. got any pics of the rear of car showing that part?

 

Here's a closeup of the Blacked out exhaust facia. I did this almost a year ago. My Contour SVT was done the same way, I just liked the looks of it. It's not painted, I used a High Performance Vinyl in a semi-gloss Black (the kind sign shops use) I put it on using a hair dryer to help stretch it around the Exhaust openings...



180180-P1030003.JPG

 

a closer one...



180181-P1030020.JPG

 

where can i buy some of that?? and can i tell me how to do it? and the price it cost.

 

i2ichal2d,
You can buy Vinyl by the linear foot at most Sign Shops. The higher Priced Vinyls are called "High Performance Vinyl" & are a higher quality & do better in a Harsher environment. I wouldn't recommend you doing a progect like this, unless you've worked w/ addhesive vinyls before. I've been fooling w/ this stuff for years & doing the G35 rear exhaust facia area, just about got the best of me.
Basically on large areas like this you want to spray a Soapy water Solution(this keeps the vinyl from permanently sticking while you place it into position) on the Surface of the G & on the back of the Vinyl. Have someone help you hold it up off the ground at this point while you work with it. Once you have the Vinyl on the car, you can use a Small Sqeegee to force the Soapy water out from behind the vinyl. Your going to have some serious wrinkles & Bubbles, that's where the Hair dryer comes in. You heat up the Vinyl to make it stretch around the curves & openings. It may sound easy, but it's Not...
Good-Luck,
RugRatCoupe

 

where are u located? if u are located in So.Cal, maybe we can have a little get together so u can help me. but if not, thanks anyways really appreciate it, it looks really nice, like on the sedan 3'series, but if its hard i might think it over.