Doe's anyone have 19x9.5's in the front with 19x10.5's in the back?

if so did it require rolling of the fender? thanks guys

 

alot of people have 19x9.5 19x10.5...depends on the offset and type of wheel

 

i do i have a +18 offset in the rear and i had to shave my fenders... like what ksig said... it depends on your offset and tire width... lots of people have the 9.5/10.5 set up

 

19x10.5 wheels size, 5x114.3 bolt pattern, and a 22mm offset
19x9.5 wheels size, 5x114.3 bolt pattern, and a 22mm offset


is there a tire that would allow me to have these without shaving the fender?

 

uhhh... not sure on that one... PM sen_jen he knows best on wheels

 

I got them and just lowered on teins h tech. no rubbing issues. Offset isn't so aggressive. front i have 23 and rear 21. My friend has his lowered on same spring but more aggressive offset and he had to roll his rears a bit. his rear offset is 18 I believe

 

You should have no problems with these wheel sizes. Considering you don't run wide bulky tires. 245 front and 275 rear Falkens are what I got, it's got the stretch look, but I like it. If you want some curb protection, run some toyos or Bfgoodrich.

 

With 275s in the rear you'll be fine even if you lower it but with 285s you'll need to roll the fenders.