2005 6MT Alignment spec
#1
2005 6MT Alignment spec
I lowered by car with Tein 350Z's H-Tech a couple months back and finally got around to getting an alignment at a local shop in Orlando. How are my specs?
Left Front
Caster: 8.9 degrees
camber: -1.8 degrees
Toe: 0.3
Right Front
Caster: 9.5 degrees
Camber: -1.5 degrees
Toe: 0.3
Left back
Camber: -2.3 degrees
Toe: 0.0
Right back
camber: -1.8 degrees
Toe: 3.1
total toe:0.6
Thrust angle: -0.3 degrees
Left Front
Caster: 8.9 degrees
camber: -1.8 degrees
Toe: 0.3
Right Front
Caster: 9.5 degrees
Camber: -1.5 degrees
Toe: 0.3
Left back
Camber: -2.3 degrees
Toe: 0.0
Right back
camber: -1.8 degrees
Toe: 3.1
total toe:0.6
Thrust angle: -0.3 degrees
#2
they did a poor job adjusting the camber and toe in the rear, the numbers should be close to the same left to right, even if they are out of spec. Its better to have matching out of spec numbers rather than numbers that vary so much left to right. If they can't get the left rear camber any lower, they should increase the camber on the right rear to match, and same with the toe settings. the fronts seem fine though
Thread
Thread Starter
Forum
Replies
Last Post