Stern 20" offset question
#18
Originally Posted by Socal_G_sedan
Does the ST-1 come in +48? I was told they only make up to +38
http://www.sternwheels.com/
#22
Originally Posted by TGMcCoy
looks good ttrank, did you have to roll your fenders for that to fit? Also, what was your offset on your fronts when you had those rims(i know you're running 20x10's in the back these days)?
Those are the volks that are on my car right now (and for sale in the marketplace ). Those are 8.5" +39F and 9.5" +47 R.
#23
Originally Posted by ttrank
Those are the volks that are on my car right now (and for sale in the marketplace ). Those are 8.5" +39F and 9.5" +47 R.
I looked closer at the stern site and see now that the +35 are only offered in 5x112 bolt pattern, so I guess i'll have to go with +38, which should be fine, right?
#24
Originally Posted by TGMcCoy
Could've sworn you where running 10s in the back, maybe some previous rims you had...
I looked closer at the stern site and see now that the +35 are only offered in 5x112 bolt pattern, so I guess i'll have to go with +38, which should be fine, right?
I looked closer at the stern site and see now that the +35 are only offered in 5x112 bolt pattern, so I guess i'll have to go with +38, which should be fine, right?
#25
Registered User
iTrader: (1)
Join Date: Feb 2006
Location: 626
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
a +38 on 9.5" in the rear is doable, but it will rub for sure and stick out on a stock suspension. Take a look at the ST-5, it has rears that will work:
https://g35driver.com/gallery/browse...mageuser=43879
https://g35driver.com/gallery/browse...mageuser=43879
Last edited by (>")> G35; 07-06-2007 at 10:15 PM.
#26
OK. I was going to wait to ask this question but I would like to take this thread a step further. I am looking into getting a set of 20" DPE's and I recently purchased a Rotora 14" (355 mm) Front and Rear BBK. I want to go staggered with the DPE's but I have no clue what offset can get me 8.5 (Front) and 9.5 (Rear) and still allow room for these brakes. Please let me know your thoughts and opinions.
Thanks,
Mike
Thanks,
Mike
#28
Originally Posted by mforrest100
OK. I was going to wait to ask this question but I would like to take this thread a step further. I am looking into getting a set of 20" DPE's and I recently purchased a Rotora 14" (355 mm) Front and Rear BBK. I want to go staggered with the DPE's but I have no clue what offset can get me 8.5 (Front) and 9.5 (Rear) and still allow room for these brakes. Please let me know your thoughts and opinions.
Thanks,
Mike
Thanks,
Mike
are you doing all of this on a sedan?!?! cant wait to see it! like previously stated, once you tell DPE that you need BBK fitment they'll get you offset's and pads for the wheels that will fit over the BBK. and they most likely will NOT give you the offsets of the wheels.
-GP-
#29
Originally Posted by Socal_G_sedan
that question has been answered already in my previous post, take a look at my 8.5 with +38 offset, you tell me if it will fit if it was 9.5 and size 265 width tires
#30