I was wondering how i can tell if my front fenders have been rolled?..... i know my rear has been cut with a dremel...but the front im not sure..... what i do know is my front tires rub pretty bad going through dips i nthe road and slice the edges of my tires...... any help on how to ID a rolled fender id appreciate it........


anthony

 

Front fenders come rolled from the factory.

 

^+1.

 

you wont have fender liners installed since the tabs that stick out will be rolled up and nothing to mount the liners too...

 

well damn........ok so what other steps can i take to help my rubbing tires?...... my 03 coupe is on 350z springs....which provide a .5 or less drop...... swap back to some original g35c springs???........


anthony

 

350z springs are a very conservative drop.

Do you have super aggressive offsets/wide wheels/huge tires?


^is that picture up to date? judging from that picture alone, it doesn't look like you'd rub.

 

what part is rubbing?

if you are rubbing on the fender liners, you can get rid of them, but watch out when wet out... you may want to protect your headlights

 

I dont know my offsets off hand, but there asanti forged wheels... 8.5 up front...with a 255/35/20 up front ( i had a 245/35/20 a few weeks ago same issue).... but yes aside from the 245/255 now tire up front the the pictures are up to date... and its only a rub going over dips in the road (happens alot) but only hits the outside part of the tire, practiclly shaves the tire on the outside edge.....