I'm requesting alot of information here. First off; I want iForged wheels. I need some information. I want them 19x?? I was thinking (if they will fit) 19x11.5 for the rear and 19x10 for the front. I want Drag radial tires for the rear and whatever the best tredded tires I could get for the front. I do not know much about wheels and tires. Anyone have a good suggestion on either one of these three styles with the best type of traction setup? I definatly want some sort of drag or slick tire for the rear. Also, let me know about sizing and width! I think our tires are origionally 18x9 or 9.5 I'm not sure, anyone know? The first pic is of the iForged Swift.

Alos if you have these rims in silver or chrome please post them here ASAP! I have a black G35, thanks!

Thanks - Joey Avino


214223-swift.jpg

 

iForged Flux:

Thanks - Joey Avino


214225-flux.jpg

 

iForged Aero:

Thanks - Joey Avino


214226-aero.jpg

 

If you're going with 19s I'd go with the spoke designs. If you're going 20s, I'd go with the mesh. I've seen the iforged senakas in 19s on a coupe and it kind of wierd to me. If I did it over again I would have gotton the senakas instead the flux wheels in 20s.

Are you sure 11.5 rear and 10 front would fit? People had to roll there fenders for 10.5 for the rear.

2003 G35 Coupe 6mt Diamond Graphite
AIM= bkchang79

 

first off, Iforged wheels are damn heavy. the weights that are given on the website are not true (i weighed mine). if you run 10 inch wide wheels in the front, and 11.5 inch wide wheels in the rear, they are going to be about 35 pounds each. i think that width is unnecessary. i have 8.5 front and 10 rears, and they look great. there are some pics of mine in the west forum in the performance nissan 3/20 meet threads. DG coupe with gunmetal senekas. my car is lowered an inch, and there is no rubbing at all...but i think i am pushing it. any more width and i would be having problems.

Chad

 

my rims with tires are 55lbs. that's front and rears.

 

you can't fit 19x10, in the front they are too wide. I think 9 is the most you can go and have no rubbing problems. I know people have 10 in the rear but 11.5 might be pushin it.

2003 G35 Coupe AT(Silver)
Injen CAI
Borla cat back exhaust
Straight Pipes
Hyper Grounding 6 wires

1/4 13.858 MPH 99.96
60ft 2.132

 

Personally i'd go for the aeros, Oh wait I did! Seriously though I think your pushin it with 10 and 11.5. I have 8.5 F 10 R and I get comments on how wide the rears are now. Plus the added weight wouldn't be fun. My Brembos are working their ***** off to stop the car now. Well it feels that way at least Im sure fot them its no sweat but still I wouldnt want to go any bigger.

 

19x9 and 19x10 it is...

Thanks - Joey Avino

 

Go for 10.5 and roll your fenders.

2003 G35 Coupe 6mt Diamond Graphite
AIM= bkchang79

 

bkchang...if you wanna sell your rims, PM me...and then get your Senekas. FOR REALZ!!!

 

Good choice on the sizes now which Spoke design did you pick?

 

i would go with the 20's, they look perfect on the G. 19's with low profile tires look a bit too small in my opinion.

Chad

 

Nah... 20's too big

Thanks - Joey Avino

 

Among the 3 you posted, I like the 6 spoke flux with the G35 coupe the best.

04 G35c 6MT Ivory/Graphite
HRE 448R 19x8.5,19x10 full polish/clear coated
Gallery of My Babies