I'm getting a new set of tires (got dang negative camber).

Currently, I'm running 255/35/19 front and 275/35/19 rear tires. I'm thinking to go a little wider like 285 or even 295 in the rear but I'm not too sure if it's going to fit. I know I may have to cut/roll fenders but that's ok.

Doen anyone have coupe pictures with wider tires than 275 in the rear on stock body?

Thanks,
JJ

 

I believe Calvin is running 285's. Not sure though. Check the picture share section...he's all over that.

 

285/35

 

Thanks man.

Cal,

Sexy 1 ill G there. Any more pictures showing side fender against tire wall? And your wheel is 10.5, correct? Did you have to roll your rear fenders? Any rubbing?

JJ

 

^That's what I thought. Question for ya Calvin...did you have to roll the fenders to run those tires?

 

Yes, they're 10.5" wheels. That picture was taken back when I was dropped on Tein 350z H-Techs. I believe my camber settings were -1.5. Rear fenders were cut.

https://g35driver.com/forums/picture-share/168372-inven-roof-spoiler.html

https://g35driver.com/forums/picture-share/161771-before-hero-goes-black.html

https://g35driver.com/forums/picture-share/141927-another-rainy-day-socal-part-two.html

See if any of those pictures are what you're looking for.

 

Thanks once again Calvin.

JJ

 

Did you find what you are looking for?

 

Yes, more meat with a little sticking out over the fenders...nice. Great pictures by the way.

I think I'll go with 285.

Do you think 295 can survive on stock rear fenders? Since you are here full-time, have you seen someone done that before?

JJ

 

I've seen people go up to 305 on stock fenders.

I was planning on going 295 with my next set, but I decided to step it down to 275 so I can put larger (10mm) spacers in the rear for a more aggressive offset.

 

My old set up 285/35 on 10.5"wheel fenders cut and rolled

new set up 285/35 on 12" wheel

 

^^ Thanks man. Nice G.

JJ

 

285/35/19 BFG KDW2