damn you are on point!

car is stock, still has dealer plates from when i bought it used a few months ago.


i plan on getting coilovers later. i'm not a fan of dumping it to the ground, but i am also not afraid to roll the fronts either

 

no drop at all yet? hmmm... The fronts will stick out if you put a 275 tire on em. The rears should be fine but you might need a little added camber.

I'd do a 245/45 up front and a 275/40 in the rear.
-GP-

 

i'm going to put coilvers on before i mount the wheels on, and when i lower i am thinking maybe a 1-2 finger gap in between the fenders front and rear, but since this is my 1st experience with this car i'll have to see how it looks first before i know for sure)

i also want to run equal sizes on all 4 corners so i can rotate every time i change the oil.

i've got bout 1.5 months til i order tires and stuff, so i'll keep searching for info.

thanks for the help Gdup35sedan

 

just run 255 45 all around

 

that would be a waste of the rear when you can easily fit a 285. At the very least, i'd run a 265-40 tire all around
-GP-

 

gotcha, well if you do a 1 finger gap, you should be fine with a 275-40 all around.
-GP-

 

thanks again guys, i appreciate the help!

 

true, can you fit that with out coilovers though?

 

he said he was going to be running coilovers before mounting the wheels, otherwise, no, they wouldnt fit with the car at stock ride height.
-GP-

 

oh i see.

 

I wonder how many guys that extra bolt on the front has caused grief for?