20" rim question
Joined: Nov 2008
Posts: 41
Likes: 0
From: San Diego, 92028
20" rim question
So I'm considering getting some 20" Axis Penta rims for my G. I'll prob do 20x9 in the front and 20x10 in the rear. I have the Brembos so I'm just wondering what else is needed. Do I need a camber kit, spacers (what size?), springs, roll the fenders? I hear all this talk and just not really sure what I'd need. If anyone who has done this could give me a cost break down for all the parts and labor they needed it would help a ton! Thanks guys!
Registered User
Joined: Jul 2007
Posts: 133
Likes: 0
I am sure that Pentas clear Brembos. 20"s on stock suspension looks like a 4x4, you will not like the stance. You will need springs, and a rear camber kit, then top that off with an alignment after a couple of weeks.
Dependent on the rear tire width, you will need to roll the rear fenders as well.
Dependent on the rear tire width, you will need to roll the rear fenders as well.
camber kit
Im getting the pentas today, and I will lower my car soon. I was only going to do a slight h tech for g35 drop. I know it is a very subtle drop, but my question is"
with 20'' axis pentas and a h tech for g35 drop, will I need to get a camber kit and/or roll my fender if I get 275/30/20 tires ?
someone please help me??????? thanks
with 20'' axis pentas and a h tech for g35 drop, will I need to get a camber kit and/or roll my fender if I get 275/30/20 tires ?
someone please help me??????? thanks
one way to find out. SLAP it all on...then process of elimination:
-u can play it safe and get a camber kit, or if the shop can align with minimal wear try that (kits run 150-200+) for the rears
-fender rolling 75-100+ per side..
-i would wait till you get the springs to put ur rims on, so u can get them aligned at teh same time...so ur not wasting money on alignments..
i think u'll be fine, without the roll. htech dont drop at much. leaves a gap in the rear.
unless ur hauling fat chicks all the time..JK man
-u can play it safe and get a camber kit, or if the shop can align with minimal wear try that (kits run 150-200+) for the rears
-fender rolling 75-100+ per side..
-i would wait till you get the springs to put ur rims on, so u can get them aligned at teh same time...so ur not wasting money on alignments..
i think u'll be fine, without the roll. htech dont drop at much. leaves a gap in the rear.
unless ur hauling fat chicks all the time..JK man
the gap in the rear is fine its just the huge gap in the front im worried bout. how much to get a camber kit installed? also do you think i should go 285/30/20 or 275/30/20 in the rear, wouldnt getting the 275's better my chances of rubbing?
also what are peoples opinion on yokahama avs es100 275/30/20 tires. They are going for $121 each thats a good deal on tires no?
also what are peoples opinion on yokahama avs es100 275/30/20 tires. They are going for $121 each thats a good deal on tires no?
Thread
Thread Starter
Forum
Replies
Last Post
FS[Canada]: 16" Ronal Rims with 205 65R16 Michelin X-Ice
multimut
Wheels & Tires CDN
4
Apr 8, 2018 06:07 PM
