Gents will a 20" Axis Pentas with the following specs fit an 05 sedan and clear wilwood BBK kit?

The wheels are 20x9 front and 20x10 rear. The offsets for these wheels are ET25 both front and back. Tire sizes are 245/35/20 up front and 275/30/20 for the rear.

Let me know what you think i'm not too sure about the BBK clearance or if these wheels would fit a sedan.

 

<a href="http://s195.photobucket.com/albums/z76/ennissmith/?action=view&current=IMG_0092.jpg" target="_blank"><img src="http://i195.photobucket.com/albums/z76/ennissmith/IMG_0092.jpg" border="0" alt="Axis Pentas"></a>

 

I dont know about bbk clearance but 25 in the back will stick out a lot lol. U'd need to slam ur car with insane camber and stretched the **** out of ur rear tires lol. or else it'd look like this.

285/35/20 with 25offset it was of a coupe.



CLEARER. it'll probably take one bounce into the fender and its a wrap lol

 

thanks for you response

 

no problem, It's definetly Doable, but Has a lot of negatives...

 

Ok so what are the limits or combinations of hweel width and spacers etc. on a 05 sedan?

in other words would this work?

https://g35driver.com/forums/19-inch...xes-t1-rs.html

https://g35driver.com/forums/19-inch...xes-t1-rs.html

 

those can work, maybe running a 225 up front and a 245 in the rear you might be able to get away with a 255 in the rear.

 

Would the Vellano VSE 20 x8.5(3inch Lip) 20 10.5(5inch Lip) fit a 05 Sedan with BBK setup?

What are the limits with regard to wheel and tire widths for a Sedan?

 

10.5 will fit on a sedan but if you are under ~50mm offset they will stick out and require a stretch tire and a lot of negative camber.