Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
255/35 /19 for tires. Spacers are really up to you, you will fit the 0s in the back no problem might want like 5mm but that's your call. May also want a small spacer up front depending on the ride height.
If you want to ride lower, run 265/30s
I personally don't like 20s much on the G, but that's just me. However if you're going to do 20s, you should make sure they have step lips! It makes the faces look the "right" size.
If you want to ride lower, run 265/30s
I personally don't like 20s much on the G, but that's just me. However if you're going to do 20s, you should make sure they have step lips! It makes the faces look the "right" size.
rims
hey guys i just got 19in rays and here is my set up
255 /40/19-rear
245 /40/19-front
i want to know if this setup is ok becuz i will be getting new tires soon. and i want to know will this wear out or put strain on my car etc.
i drive an 04 g35 sedan
255 /40/19-rear
245 /40/19-front
i want to know if this setup is ok becuz i will be getting new tires soon. and i want to know will this wear out or put strain on my car etc.
i drive an 04 g35 sedan
What spacers would you add to this setup? 19X9.5+22 225/35 19X11 +15 245/35
I'm at an 2" drop all around with -3F/-4R w/rears rolled. I was leaning towards 25mmF & 20mmR
Whatcha think? Really want -7 all around...
I'm at an 2" drop all around with -3F/-4R w/rears rolled. I was leaning towards 25mmF & 20mmR
Whatcha think? Really want -7 all around...
Joined: Jan 2010
Posts: 9,884
Likes: 635
From: Back in the OC FTMFW!

Alright...and is there a reason you WANT -7 degrees of camber
Also what setup are you running now that you have -3/-4 degrees...becuz if its the one in your comment that is an unnecessary amount of camber and stretch actually becuz you could run full size tires on that setup and still be fine and be close to stock camber
Also what setup are you running now that you have -3/-4 degrees...becuz if its the one in your comment that is an unnecessary amount of camber and stretch actually becuz you could run full size tires on that setup and still be fine and be close to stock camber
Joined: Jan 2010
Posts: 9,884
Likes: 635
From: Back in the OC FTMFW!

Oh okay.....well going for a certain offset doesn't always help becuz it changes with the widths of the wheels so a 11 wide with -7 is different from a 10.5 wide with -7...do you want both your 9.5 and 11 to be exactly -7??....




