there are plenty of people stretching those sizes on step lipped wheels..thats weird..i hope thats not the issue cause im planning on getting rid of my 2.2.2 for the lm reps

 

time to go to another few shops!

 

Yeah i definitely understand that those sizes have been mounted on those size wheels and specs. but the shops i took it to were not a regular DISCOUNT TIRE and TIRE KINGDOM or something. I did go to a discount tire shop first but the other two shops do specialty work and have been know to do real aggressive stretches. the guy even told me on the phone it could be done and has been done until we started mounting and there was no way no how.

 

how can the 1.1.2's have stretch tires like yusoslo's 19x11's and the 1.1.3's can't? crazy

 

Hey, I'm about to change the tires on my wheels, front from 225/40/19 to 245/35/19 and rears from 245/40/19 to 265/35/19. Would I need to get allignment again??

Wheel size: 19x10 +9 fronts, 19x11 +13 rears

Your help is appreciated! Thanks!

 

It's always recommended you get an alignment after new tires. I would - just to make sure my toe is still in spec and I'm not chewing up brand new tires I blew money on.

 

Will I have rubbing issues with Work vs-xx 9.55 +4 and 10.5 +6. My car is lowered on tein 350z h techs? I really don't want to roll my fenders. Tires will be 225/35/20 front and 245/35/20 rears.

Thanks a million guys.

 

04 sedan on eibach prokit
i'm assuming it won't fit but on the off chance it will i'll ask.

20x10.5 +22 all around

 

If i run a 19x9.5 +20 with 235/35/19 all around how much camber will i need?

Have bc coils and both front and rear SPC camber kits..

 

.....you need to drop that **** alot lower for it to look good with those low offsets and stretched tires....but yess you will need to roll your fenders

But seriously though it is gonna look stupid having the wheels far past the fender and then not having the right drop to correct it

 

what wheel lock will you guys recommend i need some security and i need them asap.. I have xxr 526 .... Apologies but i dont have time to go through all the pages forreal... TIA

 

How come nobody likes to roll their fenders... it is a must for any decent fitment!

 

Any idea if the Varrstoen 113 10 & 11 wide clear brembos at 15 offset?

 

wheel locks anybody??

 

On the Varrstoen Thread they said that they will clear the brembo's. Check the thread out.