hey guys, can anyone tell me if the 20" wheels on the new GT-R from Nissan will fit on the G35 coupe? I have been told the stud pattern is the same but not sure if they are too wide and if wings need to be widened. any help would be great. thanks.

 

what wings?

 

Chicken wings

 

he must be from the UK as they refer to the fenders as wings.

They will fit, but more than likely with spacers being required because they have very high positive offsets (like in the 40 and 50mm range). I think they're 20x9 and 20x10, for a G35 coupe and typically with that wheel size you'll want an offset range from +10mm to +20mm. I would just find some better wheels unless you're getting them for $1000 (USD, not pounds or euros) for the set which is unheard of.

 

you are right, I am in the uk. At the moment there is nowhere to get these wheels but was just wondering. |I have ichiba spacers on my g35 at the moment so having them on is not a problem. I have seen these wheels for sale in one place and they were asking $9600 for a set. No way man!!! anyway, thanks for the help.

 

If you dont care about spacers, you could hunt down some BMW M6 or M5 wheels and just get spacer/lug adapters for the BMW lug pattern of 5x120, they should be much cheaper.

 

i just want something different to everyone else. I am not sure what the BMW wheels look like, any pics?

 

here are M6 wheels on an E36 vert:



If you want to look at wheels that are available in the correct bolt pattern for the G35 (5x114.3) with a 20x10 and 20x9 combo check out TSW for something affordable.

 

wow those m6 rims are HOT... will those fit on 335i coupe?

 

yes, those rims are very cool. I was actually thinking of putting something very similar to them in my Toyota Supra.