what size spacers with stock 19's?
Joined: May 2009
Posts: 870
Likes: 0
From: Herndon, VA
what size spacers with stock 19's?
title says it all. im looking to get spacers, but dont know a thing about them. what size should i get with stock 19's and stock ride height?
25mm all around is pretty flush. I would do 25mm front and 30mm rear to be little aggressive. Use the search, theres a member that ran this setup on this stocks came out perfect.
Joined: May 2009
Posts: 870
Likes: 0
From: Herndon, VA
i tried to run a search for spacers, but too much garbage came up for me to sort through.
Im looking more for a flush look than aggressive, but ill have to check out some pics.
Is there a brand of spacers that better than another?
Im looking more for a flush look than aggressive, but ill have to check out some pics.
Is there a brand of spacers that better than another?
brand doesn't really matter. i have 25 all around, I might switch to 25/30 in the future, it looks amazing 25/30 i just didn't get it in the beginning because a few people warned me that it maybe unsafe. i have no idea about the validity of this claim though.
I have 20mm all around and like it. Not "hella flush" but not tucked anymore, good middle ground IMO.
I'd say look up some pictures of how flush you want to be and get something between 20-30mm.
I'd say look up some pictures of how flush you want to be and get something between 20-30mm.
before I was lowered I ran 20's all around and they looked pretty good, but once I was dropped I needed to run a bigger spacer. I'm runnin 25's in the front and 30's in the rear and it looks great. I rolled my rears just in case,,,really wasn't hard
Trending Topics
Joined: May 2009
Posts: 870
Likes: 0
From: Herndon, VA
im thinking of going 20f 25r. i saw your pics in that thread you posted Gargan....are you on stock ride height?
They were problem free until I had 275s put on this afternoon.
if you do end up getting 25 or 30 in the rear you should probably roll the fenders.
depending on some spacers
on a local forum i go to, someone got 20mm, and the stock studs stuck out so he had to grind them off to get the wheels on.
just something to consider.
i would recommend you get 25mm all around. maybe even 25/30
if you do end up getting 25 or 30 in the rear you should probably roll the fenders.
depending on some spacers
on a local forum i go to, someone got 20mm, and the stock studs stuck out so he had to grind them off to get the wheels on.
just something to consider.
if you do end up getting 25 or 30 in the rear you should probably roll the fenders.
depending on some spacers
on a local forum i go to, someone got 20mm, and the stock studs stuck out so he had to grind them off to get the wheels on.
just something to consider.
Thread
Thread Starter
Forum
Replies
Last Post
marsman328
Northern California
1
Aug 11, 2015 07:29 PM









