Another Wheel Fitment Question....

Subscribe
Feb 16, 2010 | 10:16 AM
  #1  
Looking at a set that run 19x9.5/10.5 at +25 all around. Dropping on S-Techs. Will they fit?

Tires would be 245/35 and 275/30 respectively.
Reply 0
Feb 16, 2010 | 02:10 PM
  #2  
no.
Reply 0
Feb 16, 2010 | 02:15 PM
  #3  
isn't there a thread for wheel fitment questions? just asking.
Reply 0
Feb 16, 2010 | 02:37 PM
  #4  
Go to the tech section under wheels and tires and look for a thread discussing offsets and wheel fitment. Your offsets are to aggressive.
Reply 0
Feb 16, 2010 | 02:38 PM
  #5  
Easily!!!
Reply 0
Feb 16, 2010 | 02:44 PM
  #6  
Yes those will fit. Rears would need to be pulled. Fronts would have to be rolled and slightly pulled.

S-techs are not even close to being low enough to pull this look off. You are going to need a nice drop on coils and some camber for this to work.
Reply 0
Feb 16, 2010 | 03:02 PM
  #7  
considering he is X, and the tire size he listed. The answer is still NO.
Reply 0
Feb 16, 2010 | 03:09 PM
  #8  
Woops my bad op thought you were a coupe -____-
Reply 0
Feb 16, 2010 | 03:11 PM
  #9  
Quote: considering he is X, and the tire size he listed. The answer is still NO.
Didn't see that he was an X, I was on my iPhone. He can do 225/40 and 255/35 and that setup would work. Ernie (FlyingLumpia) is running the same tire size on his 9/10 staggered setup. Still needs to go a lot lower though.
Reply 0
Feb 16, 2010 | 03:16 PM
  #10  
but he didnt ask how he can make it fit! he asked if it will fit. and i gave him an answer!













I'm such an assshole
Reply 0
Feb 16, 2010 | 03:19 PM
  #11  
^This guy...
Reply 0
Feb 16, 2010 | 03:20 PM
  #12  
Quote: Woops my bad op thought you were a coupe -____-
we're in a sedan section
Reply 0
Feb 16, 2010 | 05:07 PM
  #13  
Your gonna need coilovers for sure
Reply 0
Feb 16, 2010 | 05:54 PM
  #14  
It can fit with rolled fenders and enough camber. you may want to run smaller tire sizes so you wont need as much negative camber.
Reply 0
Feb 16, 2010 | 06:00 PM
  #15  
Even with small tires your gonna need camber
Reply 0