stock camber/toe/caster on coupe? - G35Driver - Infiniti G35 & G37 Forum Discussion

Oct 1, 2004 | 12:42 PM

andypandy

Guest

Posts: n/a

stock camber/toe/caster on coupe?

what are the stock camber/toe/caster measurements?

i just installed an exhaust last night, and i noticed the inner edge of my tire severly bald... seems like, my rears have an extreme negative camber. car is riding on eibach's, 19" wheels and 295 tires.

'03 Infiniti G35 Coupe M6
GTR - R = g35 coupe

Oct 1, 2004 | 01:08 PM

al503

Registered User

iTrader: (9)

Joined: Dec 2002

Posts: 1,477

Likes: 0

From: Beaverton Oregon

Re: stock camber/toe/caster on coupe?

From the 2004 service manual:
Front:
Camber: -.05 degrees + or -.75 degrees
Caster: 8.17 degrees + or - .75 degrees
Toe: 1mm + or - 1mm

Rear:
Camber: -1.25 degrees + or - .5 degrees.

Hope this helps.

Oct 1, 2004 | 04:55 PM

andypandy

Guest

Posts: n/a

Re: stock camber/toe/caster on coupe?

thanks. i will have to schedule an appointment for a 4 wheel alignment asap.

'03 Infiniti G35 Coupe M6
GTR - R = g35 coupe

Oct 1, 2004 | 05:05 PM

al503

Registered User

iTrader: (9)

Joined: Dec 2002

Posts: 1,477

Likes: 0

From: Beaverton Oregon

Re: stock camber/toe/caster on coupe?

oops. forgot rear total toe in:
2.8 mm + or - 2.8 mm.

Oct 4, 2004 | 07:48 PM

apollocreed71

Registered User

Joined: Jan 2004

Posts: 8

Likes: 0

Re: stock camber/toe/caster on coupe?

I am not an expert, but from what I read in many posts is that these cars are almost maxed out when aligned. I believe that is why they sell those expensive caster and toe kits. Thats why I am avoiding lowering my car. If only it was as cheap as a mustang.